Universal Learning Remote with TOUCHSCREEN User's Guide RCU900

ManualsBrandsRCA ManualsUniversal RemoteRCU900

Universal Learning

Remote with

TOUCHSCREEN

User’s Guide

remote

Limited 90 Day Warranty RCU900

RCU900_IB_revC.qxp 12/3/02 9:45 Page 1

Summary of content (36 pages)

PAGE 1
RCU900_IB_revC.
PAGE 2
RCU900_IB_revC.qxp 12/3/02 9:45 Page 2 Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Battery Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Code Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
RCU900_IB_revC.qxp 12/3/02 9:45 Page 3 Universal Learning Remote with Touchscreen Congratulations on your purchase of the RCU900 by RCA. The RCU900 is one of the most sophisticated, yet easy to use, remote control units available today. With the RCU900, juggling multiple remote controls is a thing of the past! Your RCU900 controls up to eight devices, including the most popular brands of TV, VCR, DVD, SAT/CBL, CD and audio equipment.
PAGE 4
RCU900_IB_revC.qxp 12/3/02 9:45 Page 4 RCU900 LCD Touchscreen The LCD (Liquid Crystal Display) touchscreen on your RCU900 acts as a “virtual keypad.” This touchscreen makes it easy to program and use your remote with many devices. Once you select a device key, you put the remote in that device mode and it will remain in that mode until you press another device key. When you put the remote in a specific device mode, the menu that is activated on the touchscreen will be the menu for that mode.
PAGE 5
RCU900_IB_revC.qxp 12/3/02 9:45 Page 5 Setup Routine and Procedures The SETUP key is located towards the middle of the RCU900 unit, on the right-hand side of the rubber keypad. The SETUP key is used to walk you through the steps in setting up the remote. To enter the Setup Mode, press and hold the SETUP key until the LED indicator light remains on. At that time, the Main Setup Screen appears. Setup is used for Library Code Entry, Code Search, Code Identification and other functions.
PAGE 6
RCU900_IB_revC.qxp 12/3/02 9:45 Page 6 Device Control Screens Your RCU900 displays different control screens for each device. There are two screens needed to control each device. You can easily switch between these two screens by simply pressing the LCD SCREEN key at the top right of the touchscreen.
PAGE 7
RCU900_IB_revC.qxp 12/3/02 9:45 Page 7 Code Entry In order for the RCU900 to control your devices (TV, VCR, DVD, etc.), you must program it with the library code for each device. This enables the RCU900 remote to control your device with the proper commands. If your TV, VCR, DVD, or satellite receiver is an RCA, ProScan or GE brand, the RCU900 may not need any programming to control them.
PAGE 8
RCU900_IB_revC.qxp 12/3/02 9:45 Page 8 Library Code Entry (continued) To enter a code directly from the Code List, follow these steps: 1. Manually turn on the device to be controlled (TV, VCR, DVD, etc.). 2. Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds. 3. Release the SETUP key. 4. Press and release the LCD CODE key.
PAGE 9
RCU900_IB_revC.qxp 12/3/02 9:45 Page 9 Code Search If the device you wish to control does not respond to any of the codes you have entered using the Library Code Entry, you can search the entire code library for a particular device that might not be listed in the Code List or might be listed under a different brand. When you enter a valid code for any given mode (e.g.
PAGE 10
RCU900_IB_revC.qxp 12/3/02 9:45 Page 10 Code Search (continued) that some codes can turn your device on and off but are not able to control its other functions. This process allows you to bypass codes you’ve already tried. Note: If your device responds and you accidentally overshoot that code by pressing the ON•OFF key again, press the CH- key or DOWN ARROW key to backtrack through the code library.
PAGE 11
RCU900_IB_revC.qxp 12/3/02 9:45 Page 11 9. The Autosearch sends the next code in the list every three seconds. Note: The Autosearch can take a significant amount of time, since there are many codes in the list. 10. To speed up the Autosearch, you can manually override the process and temporarily speed it up by pressing the normal search keys (CH+, CH-, ON•OFF, PLAY, LCD UP, and LCD DOWN keys) in both forward and reverse directions. 11.
PAGE 12
RCU900_IB_revC.qxp 12/3/02 9:45 Page 12 Code Identification (continued) one second each, followed by a 0.5 second gap where no digits are shown. The LED indicator light blinks once for each digit display. The sequence is completed once and then the touchscreen returns to the Main Setup Screen. 7. The Code Identification process is now complete. You can write this Code ID in the Code ID Chart for easy reference.
PAGE 13
RCU900_IB_revC.qxp 12/3/02 9:45 Page 13 4. The touchscreen now shows the Device Setup Screen. Press and release the device key on the rubber keypad for the device whose keys you want to customize (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress. 5. The touchscreen now shows the Key Label Screen. This screen shows the current screen labels for the device you have chosen (TV, VCR, SAT/CBL, etc.). The LCD SETUP and SCREEN labels are also shown. 6.
PAGE 14
RCU900_IB_revC.qxp 12/3/02 9:45 Page 14 Learned Key Reference Pages IMPORTANT NOTE: You cannot learn any commands under the LEARN, MACRO, SCREEN, SETUP or any device key.
PAGE 15
RCU900_IB_revC.
PAGE 16
RCU900_IB_revC.qxp 12/3/02 9:45 Page 16 Learn Commands Learning Tips Before transferring commands from your original remote to the RCU900, check out these useful tips on Learning. 1. Make sure you are using fresh batteries in both the RCU900 and the original remote. 2. It is recommended that a Master Clear be done before attempting any Learning. This clears all Learned commands for all device modes. (See section on Master Clear). 3.
PAGE 17
RCU900_IB_revC.qxp 12/3/02 9:45 Page 17 Learn Commands Now you’re ready to have your RCU900 learn the commands from your existing remotes. All Learned keys are saved automatically. Remember, only one original remote can be stored under any one mode. The RCU900 can learn the commands for one TV remote, one VCR remote, one DVD remote, etc. 1.
PAGE 18
RCU900_IB_revC.qxp 12/3/02 9:45 Page 18 Learn Commands (continued) 11. To save and exit from the Learn routine, press and release the LCD OK key. The touchscreen returns to the Main Setup Screen. 12. The Learning process is now complete. 13. Press LCD CLEAR on the Main Setup Screen to exit Setup Mode. Note: Learned keys will beep twice when pressed if keypress beep is turned on.
PAGE 19
RCU900_IB_revC.qxp 12/3/02 9:45 Page 19 4. All Learned command entries are now cleared for all device modes. 5. Press LCD CLEAR on the Main Setup Screen to exit Setup Mode. Smart Macro Key Operations Your RCU900’s Smart Macro feature allows you to execute a sequence of commands with one keypress. A Smart Macro learns any sequence of original remote commands. A total of 20 Learned commands can be stored under each of the nine available LCD MACRO keys.
PAGE 20
RCU900_IB_revC.qxp 12/3/02 9:45 Page 20 Program a Smart Macro (continued) 8. Macro Setup Screen 3 now appears on the touchscreen. Press and hold the key on the original remote until the LED indicator light on the RCU900 blinks once. This process takes 2-3 seconds to complete. 9. The touchscreen now shows Macro Setup Screen 4. Release the original remote key. 10. Program additional commands in the order you want them to be stored in the Smart Macro.
PAGE 21
RCU900_IB_revC.qxp 12/3/02 9:45 Page 21 4. If keypress beep is enabled, you will hear a series of beeps as the Macro executes. The number of beeps will correspond to the number of Learned commands within the Macro. Delete a Smart Macro To delete a previously programmed Smart Macro, follow these steps: 1. Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds. 2.
PAGE 22
RCU900_IB_revC.qxp 12/3/02 9:45 Page 22 Method 1 (continued) 4. Press and release the numeric keys indicating the number of minutes (01-99) you wish to set on the Sleep Timer. The LED indicator light blinks once to indicate acceptance of the keypress and the screen returns to normal operation. 5. The Sleep Timer is now set. 6. When using the Sleep Timer feature, leave the remote pointing towards the TV with an unobstructed path.
PAGE 23
RCU900_IB_revC.qxp 12/3/02 9:45 Page 23 The device you select for Volume Punch-through control must be either the TV or the AUDIO/AUX device programmed with the Audio unit. Any other selection (VCR, DVD, SAT/CBL) is denied and the LED indicator light flashes to indicate an error. The power-on default for volume control is TV Volume Punch-through. Note: All Audio Modes take any Volume/Mute keypress commands from the Audio code, even when the TV is programmed as the Punch-through device.
PAGE 24
RCU900_IB_revC.qxp 12/3/02 9:45 Page 24 Keypress Beep Feature (continued) 4. Press LCD CLEAR on the Main Setup Screen to exit Setup Mode. 5. The Keypress Beep feature is now turned on or off, depending on the previous state it was in. LCD Touchscreen Display Time You can choose the length of time the touchscreen remains on after the last keypress. The power-on default is 30 seconds from the last keypress.
PAGE 25
RCU900_IB_revC.qxp 12/3/02 9:45 Page 25 Master Reset A Master Reset returns all the RCU900 defaults back to the original factory settings. The Master Reset clears all customerprogrammed codes, Learned commands and Smart Macros, and resets all key labels. To perform a Master Reset, follow these steps: 1. Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds. 2.
PAGE 26
RCU900_IB_revC.qxp 12/3/02 9:45 Page 26 Glossary of Terms AUDIO FEATURES (ACTIVE LCD KEYS IN AUDIO DEVICE MODE) AM.FM The AM.FM allows you to select the AM or FM band on your audio system. CD, TAPE, TUNER, TV, VIDEO1 & VIDEO2 Use the CD, TAPE, TUNER, TV, VIDEO1 & VIDEO2 keys to select the device you want to control. CENTER, FRONT, REAR & OPTION You can adjust the levels of the center, front and rear speakers by using the LEVEL▲/LEVEL▼ keys.
PAGE 27
RCU900_IB_revC.qxp 12/3/02 9:45 Page 27 MENU The LCD MENU key brings up the Main Menu. If you are already in the menu system, press the LCD OK or MENU keys to select a highlighted choice. Use the LCD NAVIGATION keys (UP, DOWN, LEFT, and RIGHT ARROW keys) to move through the menu selections. Note: With some brands, the CH+ and CH- and VOL+ and VOL- keys on the rubber keypad navigate through the highlighted choices.
PAGE 28
RCU900_IB_revC.qxp 12/3/02 9:45 Page 28 Troubleshooting PROBLEM SOLUTION The touchscreen does not show anything when you touch it or when you press the SETUP or LIGHT keys. A) Replace the batteries with four new AA alkaline batteries. B) Check to make sure batteries are properly installed. The remote does not operate your A) Try all code programming audio or video devices. procedures with all the codes from the appropriate part of the Code List.
PAGE 29
RCU900_IB_revC.qxp 12/3/02 9:45 Page 29 Code List Televisions Abex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185 Acme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .021 ,050 ADA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .013 ADC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 30
RCU900_IB_revC.qxp 12/3/02 9:45 Page 30 Televisions (continued) Majestic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .000, 001 Marantz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .004, 009, 062 Megatron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .004, 009, 059 MEI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 31
RCU900_IB_revC.qxp 12/3/02 9:45 Page 31 VCR/PVR Admiral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .001 Adventura . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .026 Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027 Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 32
RCU900_IB_revC.qxp 12/3/02 9:45 Page 32 VCR/PVR (continued) Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .055, 080, 081, 123 Portland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .016, 017, 019, 110 Proscan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .000 Protec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 33
RCU900_IB_revC.qxp 12/3/02 9:45 Page 33 Sampo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192 SEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203 Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 Sherwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 34
RCU900_IB_revC.qxp 12/3/02 9:45 Page 34 Cable Boxes (continued) Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .025 Memorex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .026 Movie Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .002, 027 NSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 35
RCU900_IB_revC.qxp 12/3/02 9:45 Page 35 Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .006, 007, 008, 165 Casio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 Citizen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Curtis Mathes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 36
RCU900_IB_revC.qxp 12/3/02 9:45 Page 36 Helpline If you need additional setup assistance, please call the Helpline at 1-800-420-7968. Limited 90-Day Warranty Thomson Inc. warrants that, for 90 days from date of purchase, it will replace this product if found to be defective in materials or workmanship. Return it postage paid to the Product Exchange Center address for prompt, no-charge replacement with a current equivalent. This replacement is Thomson Inc.’s sole obligation under this warranty.