Lyra Wireless User’s Guide Changing Entertainment. Again.
Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Table of Contents Chapter 1: Connections and Setup Things to Consider Before You Connect ................................................... 3 Protect Against Power Surges .................................................................................................. 3 Protect Components from Overheating ................................................................................ 3 Position Cables Properly to Avoid Audio Interference ......................................................
Table of Contents Install Batteries in the Remote ................................................................ 19 Using the Remote with the Lyra Wireless and Other Components...... 19 Playing Music through the Lyra Wireless ............................................... 20 Fine Tuning the Lyra Wireless.................................................................. 20 If there is no signal at all ........................................................................................................
Chapter 1: Connections and Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet. • Turn off all components before you connect or disconnect any cables. Protect Components from Overheating • Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely. • Don’t stack components.
Chapter 1: Connections and Setup Audio System Requirements • Audio receiver with auxiliary inputs (line level) or other component with audio inputs (TV, VCR, etc.). Computer System Requirements Windows® PC Requirements • • • • • • Pentium 300MHz or higher Windows® 98SE, Me, 2000, or XP Microsoft Internet Explorer 5.
Chapter 1: Connections and Setup Unpack the box and check your parts All of the items shown below should have come packed in the box with your Lyra Wireless.
Chapter 1: Connections and Setup Front of the Lyra Wireless Units Remote control antenna Signal strength indicators Power indicator Power indicator SIGNAL POWER POWER TRANSMITTER RECEIVER Antenna Antenna Transmitter Receiver Back of the Lyra Wireless Units Power jack ON switch CHANNEL switch USB jack Power jack CHANNEL 9V ON OFF 1 2 3 4 Transmitter USB 9V CHANNEL switch LINE OUT jack CHANNEL 1 2 3 4 LINE OUT Receiver Remote control antenna 6 Chapter 1
Chapter 1: Connections and Setup 3 4 CHANNEL 9V ON OFF 1 2 3 4 USB POWER 2 5 1 Connecting the Lyra Wireless Transmitter to your Computer 1. Connect the small end of the USB cable to the USB jack on the back of the Lyra Wireless transmitter and the other end to the USB jack on your computer. 2. Connect the small end of the large power supply to the power jack on the back of the Lyra Wireless transmitter and the other end into an AC outlet. 3.
Chapter 1: Connections and Setup 3 CHANNEL 9V 1 2 3 4 LINE OUT POWER 2 1 Important: Make sure to push the plug of the audio cable all the way into the LINE OUT jack. Connecting the Lyra Wireless Receiver to your Audio Receiver 1. Connect the small end of the audio cable to the LINE OUT jack on the back of the Lyra Wireless receiver and the other ends (the red and white plugs) to the Audio Input jacks (sometimes labeled Aux or Line ) on your audio receiver.
Chapter 1: Connections and Setup Improving Performance Orientation of the Antennas Proper orientation of the antennas is important for good performance. You may find that the system works better with one or more of the antennas in the horizontal (flat) position. The receiver and transmitter tend to operate better in high locations, where the signal path is wider and stronger (on a shelf, for example). Watch the receiver signal strength indicators for indication of signal strength.
Chapter 1: Connections and Setup Fine Tuning the Lyra Wireless To get the best signal reception, the Lyra Wireless units should face each other using an imaginary “line of sight.” You can place the transmitter and receiver in separate rooms, or even separate floors of your house, so you don’t have to worry about the units being close to each other. Other barriers in your house may affect the signal, so you may need to adjust the positions of the transmitter and receiver somewhat.
Chapter 2: MUSICMATCH and the Lyra Wireless Install the software on your computer In order to play music through the Lyra Wireless system, you need to install some software first. The Music Management CD that came with your Lyra Wireless contains all the software you need. The MUSICMATCH Jukebox™ software organizes your music collection and plays it through the Lyra Wireless system, and the remote control application makes it easier to navigate through MUSICMATCH.
Chapter 2: MUSICMATCH and the Lyra Wireless 9. When the remote control software installation is complete, click Install MUSICMATCH Jukebox on the Lyra Wireless Quick Start screen to install MUSICMATCH. The Lyra Wireless Quick Start screen. 10. When the MUSICMATCH Jukebox Setup screen appears, click Next to begin setup. Note: It is recommended to uninstall any previous installations of the MUSICMATCH Jukebox software before proceeding.
Chapter 2: MUSICMATCH and the Lyra Wireless Launching MUSICMATCH The MUSICMATCH icon found in your computer’s system tray. The MUSICMATCH software converts audio files to the mp3 format so you can play them on your Lyra Wireless. This section describes some basic MUSICMATCH features and explains how to convert music to the mp3 format. For more information about MUSICMATCH, see the tutorial on the Lyra Wireless Quick Start screen or go to www.musicmatch.com. 1.
Chapter 2: MUSICMATCH and the Lyra Wireless Turning off the Chime The Lyra Wireless software menu. You may want to turn off the chime sound the computer makes each time you press a valid button on the remote. To do this, right click on the transmitter tower icon in your computer’s system tray (the software menu appears). Click Chime Sound.
Chapter 2: MUSICMATCH and the Lyra Wireless Audio Setup Depending on how your computer is currently set up, you may have to make some adjustments so that the music and sound are directed to the right places. You may need to make sure MUSICMATCH is configured properly, too (see below). Settings in MUSICMATCH 1. Make sure the MUSICMATCH application is launched on your computer. If it’s not, press the LYRA WIRELESS button on the remote. 2. From MUSICMATCH’s main menu, click on Options and then Settings. 3.
Chapter 2: MUSICMATCH and the Lyra Wireless Soundcard Settings in Your Computer’s Control Panel Note: This setting configures the chime and Windows sounds that play through your computer’s sound card. If you want them to play through the Lyra Wireless, select USB Audio Device (or Lyra Wireless, for Windows XP) under the preferred device setting. If you have Windows 98SE or Me 1. Click on the Start icon in the lower left-hand corner of your screen. 2.
Chapter 2: MUSICMATCH and the Lyra Wireless If you have Windows XP 1. Click on the Start icon in the lower left-hand corner of your screen. 2. Select Settings, followed by Control Panel (the Control Panel window appears). 3. Double click on the Sounds and Audio Devices icon, and select the Audio tab. 4. Click on the arrow under Default device and make sure your sound card is selected. The sound card settings screen for Windows XP.
Chapter 2: MUSICMATCH and the Lyra Wireless 4. Double click on the CD-ROM in the device list. 5. Click on the CD-ROM drive you want to use with MusicMatch Juke Box. 6. Click the Properties button, then click on the Properties tab. 7. Click the box for Enable digital CD audio for this CD-ROM device. Note: Some CD-ROM devices do not support digital CD audio, and are not compatible with the Lyra Wireless. If Enable digital CD audio for the CD-ROM device is grayed out, your CD-ROM is not compatible.
Chapter 2: MUSICMATCH and the Lyra Wireless More on MUSICMATCH To let you get started listening to your music, we’ll only mention the MUSICMATCH features that directly apply to the Lyra Wireless in this user’s guide. For additional information about MUSICMATCH Jukebox features such as MUSICMATCH Radio MX, creating music CDs, and all the music library features, go to: • The MUSICMATCH tutorial on the Lyra Wireless Quick Start screen. • Getting Started tips • Online help (www.musicmatch.
Chapter 2: MUSICMATCH and the Lyra Wireless Playing Music through the Lyra Wireless Now that you have connected your Lyra Wireless and installed all the necessary software, it’s time to listen to some music. 1. Make sure the MUSICMATCH application is launched on your computer. If it’s not, press the LYRA WIRELESS button on the remote. 2. Select the music source you want to play by pressing the corresponding button on the remote (FILE, RADIO, CD).
Chapter 2: MUSICMATCH and the Lyra Wireless Using the Remote with MUSICMATCH You can use the remote to control several of the functions of MUSICMATCH, including launching the MUSICMATCH software; changing play modes (radio, music files, CDs); adjusting the volume; and changing tracks, playlists, and internet radio stations. Launching MUSICMATCH ON•OFF button LYRA WIRELESS button You can start MUSICMATCH by pressing the LYRA WIRELESS button on the remote.
This page intentionally left blank.
Chapter 3: Additional Information Troubleshooting Most problems you encounter with your Lyra Wireless can be corrected by consulting the following troubleshooting list. Note: For additional troubleshooting information, visit www.rca.com/digitalaudiodownloads or call 580-634-0115. General Problems Lyra Wireless won’t turn on • Make sure both the transmitter and receiver are plugged in. • Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.
Chapter 3: Additional Information The Remote Control Doesn’t Work • Something might be between the remote and the remote sensor on the component. Make sure there is a clear path. (This is only when using the remote to operate other components, such as a TV or VCR.) • Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote. • You may need to reset the remote control: remove batteries and press the number 1 button for at least 60 seconds.
Chapter 3: Additional Information Other Buttons on the Remote Control LYRA WIRELESS ON • OFF VCR DVD TV AM•FM SAT•CABLE (0-9) Number buttons Selects channels up to 99 by pressing two number buttons. Selects 3-digit channels by pressing and holding 1 until 1 – – appears on screen. Then press the other two numbers. AM•FM Puts a compatible audio receiver in radio mode.
Chapter 3: Additional Information SHUF•REPEAT Puts a compatible CD player or DVD player in repeat or shuffle mode. STOP Stops the current function (record, playback, rewind, etc). TAPE Puts a compatible audio receiver in tape mode. TV Turns on a compatible RCA, GE, or Proscan TV and puts the remote in TV mode. Also used with the ON•OFF button to turn on/off a compatible TV. VCR Turns on a compatible VCR and puts the remote control in VCR mode. VOL < and > Raises and lowers the volume of some compatible TVs.
Chapter 3: Additional Information LYRA WIRELESS ON • OFF DVD TV VCR AM•FM SAT•CABLE Programming the Remote to Operate Other Components The universal remote can be programmed to operate most brands of remote controllable components. The remote is already programmed to operate most RCA, GE, and Proscan components. Find Out If You Need to Program the Remote Indicator To determine whether the universal remote needs to be programmed for your component, turn the component ON.
Chapter 3: Additional Information Important You must continue pressing the component button while you enter the code. Let’s say you have a Zenith TV. To program the universal remote to operate the VCR, you would: Press and hold the TV button while you enter the first code listed for Zenith in the TV Codes column. Release the TV button. Press ON•OFF to see if the TV responds. If it doesn’t, follow the same steps, but enter the second code for Zenith TVs instead of the first.
Chapter 3: Additional Information Code List TV Codes Abex .............................................................................. 1172 Admiral .................................................... 1001, 1173, 1211 Adventura ..................................................................... 1174 Aiko ............................................................................... 1016 Akai ........................................................... 1002 Alleron .......................................
Chapter 3: Additional Information Pioneer ........... 1004, 1006, 1090, 1091, 1092, 1179, 1185 Portland .............................. 1004, 1005, 1006, 1016, 1171 Price Club ..................................................................... 1105 Prism ............................................................................. 1054 ProScan ............................................................... 1000, 1181 Proton ........................................... 1004, 1006, 1012, 1093 Pulsar .........
Chapter 3: Additional Information Jensen ........................................................ 2055, 2056, 2111 JVC .............................. 2009, 2010, 2011, 2018, 2111, 2123 Kenwood ................................................... 2009, 2010, 2011, ......................................................... 2016, 2018, 2111, 2123 KLH .................................................................................. 2061 Kodak ...................................................................
Chapter 3: Additional Information Philips . 5011, 5012, 5013, 5019, 5025, 5030, 5031, 5032 Pioneer ................................................................ 5033, 5034 Pulsar ............................................................................ 5026 RCA .......................................................... 5047, 5049, 5052 Realistic .............................................................. 5009, 5049 Regal ...................................................................
Chapter 3: Additional Information FCC and Industry Canada Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Chapter 3: Additional Information Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • 90 days from date of purchase - Unit repair or exchange, which includes parts and labor. • 91 days to 1 year from date of purchase - Unit repair or exchange, which includes parts only; you pay the labor. • The warranty for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
Chapter 3: Additional Information What your warranty does not cover: • Acts of nature, such as but not limited to lightning damage. • Adjustment of customer controls. • Damage from misuse or neglect. • A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. • Batteries. • Units purchased, serviced or operated outside the U.S.A. • Loss of customer’s software, firmware, information, or memory data. • Installation.
This page intentionally left blank.
Visit our website at www.rca.com/mp3zone Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson Inc. 10330 North Meridian Street Indianapolis, IN 46290 ©2003 Thomson Inc.
