- Thomson Inc. User's Guide TV RD900W
Table Of Contents
- Things to Consider Before You Connect
- Protect Against Power Surges
- Protect Components from Overheating
- Position Cables Properly to Avoid Audio Interference
- Connection Pictures
- Audio System Requirements
- Computer System Requirements
- Windows® PC Requirements
- Unpack the box and check your parts
- Front of the Lyra Wireless Units
- Back of the Lyra Wireless Units
- Connecting the Lyra Wireless Transmitter to your Computer
- Connecting the Lyra Wireless Receiver to your Audio Receiver
- Improving Performance
- Orientation of the Antennas
- Fine Tuning the Lyra Wireless
- If there is no signal at all
- If the signal is weak or there is interference
- Avoiding Interference
- Cordless Phone and Baby Monitor Interference
- Chapter 2: MUSICMATCH and the Lyra Wireless
- Install the software on your computer
- Launching MUSICMATCH
- Launching the Remote Control Software
- Turning off the Chime
- Closing the Remote Control Software
- Audio Setup
- Settings in MUSICMATCH
- Soundcard Settings in Your Computer’s Control Panel
- CD-ROM Settings in Your Computer’s Control Panel
- More on MUSICMATCH
- Install Batteries in the Remote
- Playing Music through the Lyra Wireless
- Fine Tuning the Lyra Wireless
- If there is no signal at all
- If the signal is weak or there is interference
- Improving Performance
- Orientation of the Antennas
- Using the Remote with MUSICMATCH
- Launching MUSICMATCH
- Music Sources
- Playing Music
- Changing Tracks and Scanning Within a Track
- Adjusting the Volume
- Changing Playlists and Internet Radio Stations
- Repeating a Playlist
- Buying Music
- Chapter 3: Additional Information
- Troubleshooting
- Care and Cleaning
- FCC and Industry Canada Information
- Limited Warranty
Chapter 2: MUSICMATCH and the Lyra Wireless
18 Chapter 2
4. Double click on the CD-ROM in the device list.
5. Click on the CD-ROM drive you want to use with MusicMatch Juke Box.
6. Click the Properties button, then click on the Properties tab.
7. Click the box for Enable digital CD audio for this CD-ROM device.
Note: Some CD-ROM devices do not support digital CD audio, and are not compatible with the Lyra Wireless. If
Enable digital CD audio for the CD-ROM device is grayed out, your CD-ROM is not compatible.
If you have Windows XP
1. Click on the Start icon in the lower left-hand corner of
your screen.
2. Select Settings, followed by Control Panel (the Control
Panel window appears).
3. Double click on the Sounds and Audio Devices icon, and
select the Hardware tab.
4. Select your CD-ROM in the list, and click Properties (the
Properties window appears).
5. Click the Properties tab, then under Digital CD Playback,
click the box for Enable digital CD audio for this CD-
ROM device.
Note: Some CD-ROM devices do not support digital CD audio, and
are not compatible with the Lyra Wireless. If Enable digital CD
audio for the CD-ROM device is grayed out, your CD-ROM is not
compatible.
The sound card settings screen for
Windows 2000.
The sound card settings screen for
Windows XP.
If you have Windows 2000
1. Click on the Start icon in the lower left-hand corner of
your screen.
2. Select Settings, followed by Control Panel (the Control
Panel window appears).
3. Double click on the Sounds and Multimedia icon, and
select the Hardware tab.
4. Select your CD-ROM in the list, and click Properties (the
Properties window appears).
5. Click the Properties tab, then under Digital CD Playback,
click the box for Enable digital CD audio for this CD-
ROM device.
Note: Some CD-ROM devices do not support digital CD audio, and
are not compatible with the Lyra Wireless. If Enable digital CD
audio for the CD-ROM device is grayed out, your CD-ROM is not
compatible.