INSTRUCTION MANUAL LED TV RLEDV1920A
Table of Contents Caution 2 Important Safety Precautions 3 Wall Mount Installation 4 TV Bracket assembly 5 Top/Side panel diagram 6-7 Remote Controller Battery Installation Using the Remote Control 8 Install TV Set your TV Connect Antenna and power Turn On TV Systems Connection Setup Wizard Select Input Source 9 10 12-13 14 15-31 15-17 17-18 19 20 21-23 24-25 26 26 27 27 28-29 30-31 32-33 TV Main Menu Operation Sound Menu Time Menu Setup Menu Close Caption Lock Menu US Rating TV MPAA Canada
Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3
Wall Mount Installation BB4 * 12mm 3.95” x 3.95” 100 100 8 3.95” 3.
TV Bracket assembly 1.Match the TV unit into the stand, then hold the TV stand, revolve and lock the tv unit tightly as the arrowhead point. 2.Fix the screws into the TV stand after installing the tv unit and tv stand.
Top panel diagram (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press to turn on and off Indicator on(Red) Standby mode Indicator on(Green) Power on mode The functions of the buttons on the TV are as follows: / / VOL CH+/-:When watching TV: select channels. (DVD Mode. CH-:DVD Eject. CH+:Play/Pause DVD Program) MENU: 1.Press Menu. 2.Press SOURCE to enter. 3.Use CH+/- to shift UP/DOWN. 4.Press SOURCE to confirm,then press VOL+/-to adjust. 5.
Side Panel Diagram INPUT VIDEO R L COAXIAL (Left Side) INPUT DC 12V AC 12 0V ~ 60 Hz service port HDMIservice port Y HDMI1 HDMI2 Pb HDMI3 Pr COAXIAL (Back Side) Name Function Description COAXIAL Digital Audio Output AV INPUT Service Port HDMI IN VGA IN PC AUDIO IN YPbPr ANT 75Ω EARPHONE For Upgrade Use Connect to HDMI of DVD or other equipment VGA signal from computer output PC audio input Connect to the composite terminal of your DVD/VCR Connect to ANT or cable source Earphone outpu
Remote Controller SLEEP: S.MODE: Select amount of time before TV turn off automatically. Press "-" to enter a program number for multiple program channel, such as 2-1 etc. Press to cycle through the different sound settings P.MODE: Press to cycle through the different picture settings P.M OD E SL EE P S. MO DE ME NU SO UR CE ENTER MTS / MP3PROG: Press to select the audio mode,you can select stereo,Mono, or SAP(second audio program).
cm 10cm 10cm side LED TV 3 indicator 9
INPUT VIDEO L R COAXIAL 2 Component INPUT DC 12V service port HDMI Y Pb INPUT VIDEO L R COAXIAL 10 Pr
INPUT DC 12V service port Y HDMI Pb Pr INPUT DC 12V service port Y HDMI 11 Pb Pr
Setup Wizard Connect an RF cable from the TV’s input called “RF-In” and to your TV Aerial socket. Select Language Press button to select the language to be used for menus and message. Press ▼ / ▲ button to select go to next step and press ENTER/ button to go. Select Time Press ▼ / ▲ button to select the time zone, daylight saving time and time format you want to. Press button on the remote control to adjust.
Setup Wizard Auto Scan Press button to select the antenna type. Press ▼ / ▲ button to select go to next step and press ENTER/> button to start auto scan.
Select Input Source Source Select TV AV Component DVD HDMI PC Press INPUT button to display the input source list, Press ▼ / ▲ or INPUT button to select the input source you want to, Press ENTER button to enter the input source, Press EXIT button to quit. Main Menu Press MENU to display the main menu or return to the previous menu or close the main menu. Press to highlight the desired menu icon, and press ENTER to select.
TV Main Menu Operation Picture Menu Press M ENU to enter the main menu, Press button to select. Press ENTER / ▼ to enter. Press M ENU again to exit or back to parent menu. Press ▼ / ▲ button to select among Picture Mode /Brightness/ Contra st / Color / Tint / Sharpness / Color Temperature/ Advanced Settings. Press ENTER / ▼ to enter. Press button to adjust. Press M ENU again or back to parent menu. 【Picture Mode】 Adjust picture mode to change picture appearance.
TV 【Color】 Adjust the saturation of the color based on your own like. Press button to adjust. 【Tint】 Adjust the hue(Red,Green,Blue) of the picture. Press button to adjust. 【Sharpness】 Adjust the peaking in the detail of the picture. Press button to adjust. 【Color Temperature】 Increase or reduce warm color of the picture personally(re d),a nd the cool color personally(blue) according to your like. Increase the sex-linked colors for the white. Normal Warm Increase the red color for the white.
TV 【Dynamic Contra st】 Automatically adjust picture detail and brightness. Press button to select (Off/O n). 【HDMI Mode】 Only available in HDMI input. Press button to select (Video/Graphic). Sound Menu Press M ENU to enter the main menu, Press button to select. Press ENTER / ▼ to enter. Press M ENU again to exit or back to parent menu. Press ▼ / ▲ button to select among /Sound Mode / Bass / Treble / Balance /MTS/ Audio Language /Digital Audio Output/Surro und Sound/ AVL .
TV 【Sound Mode】 Select a sound mode to achieve ideal sound. Press button to select(S tandard / Music / Movie / Sports / User). Note:The bass and tre ble are only available in User mode,you can adjust as you like. Standard Produces a balanced sound in all environments. Music Preserves the original sound. Good for musical programs. Movie Enhances tre ble and bass for a rich sound experience. Sports Enhances vocals for TV audio. User Select to customize audio settings. 【Bass】 Adjust the bass effe ct.
TV Time Menu Press M ENU to enter the main menu, Press button to select. Press ENTER / ▼ to enter. Press M ENU again to exit or back to parent menu. Press ▼ / ▲ button to select among Sleep Timer / Time Zone / Daylight Saving Time / Time Format / Auto Clock / Clock. Press ENTER / ▼ to enter. Press button to adjust. Press M ENU again or back to parent menu. 【Sleep Timer】 Set a timer for the TV to turn off automatically.
TV Setup Menu Press M ENU to enter the main menu, Press button to select. Press ENTER / ▼ to enter. Press M ENU again to exit or back to parent menu. Press ▼ / ▲ button to select among Menu Language / Transparent / OSD Timeout / Closed Caption /Over Scan/ Input Label / Other settings / Restore Default / Setup Wizard. Press ENTER / ▼ to enter. Press button to adjust. Press M ENU again or back to parent menu. 【Menu language】 Select an OSD menu language can be displayed.
TV Close Caption 【CC Mode】 Turn Closed Captioning on/off. Press button to select(C C Off / CC On / CC OnMute). 【Analog CC】 Set Closed Captioning for standard(analog) program. Press button to select(C C1 / CC2 / CC3 / CC4 / TEXT1 / TEXT2 / TEXT3 / TEXT4). 【Digita l CC】 Set Closed Captioning for digital program. Press button to select(O ff / Service1 / Service2 / Service3 / Service4 / Service5 / Service6). 【O ptio n】 Adjust the digital Closed Captioning setting. Press > button to enter.
TV 【Over Scan】 Press button to select(O n / Off) . It is only available to enter 1080i/720p/1080p in DTV/Component/HDMI.Default is On. It fixed set to be On in ATV/AV. It fixed set to be Off in PC/USB. 【Input Labels】 Create labels for the devices connected to your TV. Press ENTER / button to enter. 【Other Settin gs】 Set the parameter of audio only, no signal power off and no operation power off. Press ENTER / button to enter.
TV 【Restore Default】 Change power on options or reset TV to factory default. Press ENTER / > button to enter. 【Setup Wizard】 Set the first time installation. Press ENTER / > button to enter. For detail please refer to page 12~13.
TV Lock Menu Press M ENU to enter the main menu , Press button to select . Press ENTER / ▼ to enter . Press M ENU again to exit or back to parent menu . Press ▼ / ▲ button to select among Change Password / System Lock / Input Block / US Rating / Canada Rating /RRT Setting / Reset RRT/Hotel menu Press ENTER / ▼ to enter . Press button to adjust . Press M ENU again or back to parent menu . Enter your 4 - digital password.
TV 【Change Password】 Enter a new 4-digital password then re-enter it to confirm. Press > button to enter. 【System Lock】 Lock or unlock the buttons on the TV. Press button to select(O ff / On). 【Input Block】 Block or unblock the input sources. Press > button to enter. Press button to select(U nblock / Block). 【US Ratin g】 Restri ct movie and TV programs by US Ratings. Only available when "System Lock" is "on". Press > button to enter. For detail please refer to page 26~27.
TV US Rating For the United States, the rating setting basically include the following options: TV, MPAA. TV The TV rating compose of two aspects: age-based and content-based. Age Define TV-Y General TV-Y7 Parental guidance suggested TV-G Parents strongly cautioned TV-PG Retricted TV-14 No one 17 and under admitted TV-MA Adult audience only audience *Note: The content ratings will increase depending on the level of the age-based rating.
TV MPAA This system defines the rating control which come from MPAA rules. Rating Define G General PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned. Some material may be inappropriate for children under 13. R Restricted. Children under 17 require accompanying parent or adult guardian. NC-17 No one 17 and under admitted. X Adult audience only. audience. All ages admitted.
TV Hotel Menu 【Hotel Mode】 Set hotel mode On or Off. Note: The following settings work only when Hotel Mode is set to be On. 【Boot Setting】 【Picture Mode】 Adjust picture mode to change picture appearance. Press button to select(Standard / Dynamic / Soft / User). 【Default Volume】 Set the default volume for every time you open the TV, the default volume is 20. 【Max Volume】 Set the max volume that you can adjust. 【Boot Source】 Set the default input source when turning on your TV.
TV 【Boot Channel】 Set boot channel On or Off. Note:Channel Select is available when Boot Channel is set to be On. 【Channel Select】 Set boot default on what channels.After channel searching,channels in the list can be selected. 【Hotel Lock】 To lock the Tuner/Key Pad/Menu Lock that you want. Channel searching is invalid when Tuner Lock is set to be On 【Power Save】 Set a timer for the TV to turn off automatically. Available Timer:60Min,120Min,180Min,240Min,Off 【TV to USB】 Backup data to USB.
TV Channel Menu Press M ENU to enter the main menu, Press button to select. Press ENTER / ▼ to enter. Press M ENU again to exit or back to parent menu. Press ▼ / ▲ button to select among Air/C able / Auto Scan / Favorite / channe list / Show/Hide / Channel Number / Channel Label . Press ENTER / ▼ to enter. Press button to adjust. Press M ENU again or back to parent menu. 【Air/C able】 Select signal type . Press button to select(A ir/C able). 【Auto Scan】 Automatically search for channels.
TV 【Favorite s】 Add channels to create a favorite list. Press > button to enter. 【Channel List】 Display your program list. Press > button to enter. 【Show/Hide】 Show or hide the channels in your program list. Press > button to enter. 【Channel Number】 Show the channel number. Press button to adjust. 【Channel Label】 Create labels for channels ,up to 7 characters . Press button to adjust.
PC PC Menu Press INPUT to select PC source. Press M ENU to enter the main menu, Press button to select Setup menu. Press ▼ to select PC Settings. Press ▼ / ▲ button to select among H-Pos / V-Pos / Clock / Phase / Auto. Press ENTER / ▼ to enter . Press button to adjust . Press M ENU again or back to parent menu .
PC 【H-Pos】 Adjust the horizontal position of the picture. Press button to adjust. 【V-Pos】 Adjust the vertical position of the picture. Press button to adjust. 【Clock】 Adjust the vertical position of the picture. Press button to adjust. 【Phase】 Adjust the horizontal interfering lines. Press button to adjust. 【Auto】 Adjust to the screen automatically to the optimal position of the picture. Press > button to enter. *Notes: 1.
DVD Setup Press the “D.Setup” button to enter the DVD settings menu,use the “ ” buttons to select thedesired menu page (General / Audio / Video / Preferences),and use “ ” buttons to select the items in each menu,then use “ ” buttonto enter the selected item. If you then change any setting,press “ENTER” button toconfirm the value you changed.Press the “ ”button to return to the left submenu;to go back up to one of the main DVD menu pages,press “EXIT” button. 1.
DVD Setup 3.Video Setup Page Sharpness:adjust the sharpness of the image. Brightness:adjust the brightness of the image. contrast:adjust the contrast of the image. 4.Preference Page (Note:This menu page will pop up before put the disc into DVD.
Help 36
Specifications VGA Resolution Vertical frequency hz 640x480 800X600 1024x768 1360x768 60HZ 60HZ 60HZ 60HZ 1920x1080 60HZ HDMI Format Vertical frequency hz 480 i/P 576 i/P 720 P 1080 i 60HZ 50HZ 50HZ/60HZ 50HZ/60HZ Parameter specification Screen Size 19” NTSC / ATSC PAL, NTSC 800 IN:TV, AV, YPbPr, PC AUDIO,VGA, HDMI. OUT: COAXIAL,EARPHONE. 5W+5W DC 12V 3A 36W AC adapter NOTE: This user s manual is for reference only .