ncA RP-7975/RP-7978 USE AND CARE GUIDE CD/Radio/Cassette Recorder 20 Tape Cassette Compartment 21 Tape Operation + Play • Rewind ;.
IMPORTANT INFORMATION IMPORTANT INFORMATION REQUIRED BY FEDERAL COMMUNICATIONS CONCERNING RADIO FREQUENCY INTERFERENCE COMMISSION Thisdevice generatesand uses radiofrequency(RF) energyand if not installed and usedproperlythis equipment may cause interferenceto radio and television reception. This equipment has been type tested and found to comply with the limits for a Class B Computing Device in accordance with the specifications in Subpart J of Part 15 of FCC Rules.
Thisunitoparateson120VAChousehold power or6 "D'-size batteries. Batteries are not included. AC POWER OPERATION Plug one end of the AC lice cord into the AC Input Jack on the left side of the cabinet,and the oppoelte end into 120-vott AC householdoutlet. Plugging the AC lice cord into the set automatically disconnects the batteries. The polarized AC line plug (one blade is wider) is a safety feature. The plug fds into the power outlet only one way.
1. Slide FUNCTION switch to RADIO. • The Power "ON" indicator will light. 2. Set BAND Switch to desired broadcast band AM or FM. 3. Use TUNING knob to select a station. 4. Adjust VOLUME control to your listening preference. 5. To tum the radio off, slide FUNCTION switch to TAPE (Radio Off). When tuned to FM, stations broadcastingin stereo will be heard in stereo and those broadcasting in mona will be heard in mona. AM Antenna - The AM antenna, built into the unit, is somewhat directional.
DISC up disc play (fast forward).The disc materialwill be audible, allowing you to scan for a favoritesegment or skip a segment. Release the button and normal PLAY resumes. PLAY 1. After the disc is installed and the compartment door closed, the disc will begin to spin and the player will scan the table of contents encoded in the lead-in portion of the disc. • Duringthis time, *cd" willflash in the display. 2. After the table of contents are read, the disc will stop spinning.
AUTOMATIC 4. Press the PLAY button. 5. Adjust VOLUME control to your preferred listening level. 6. Switch BASS BOOST end/or SIMULATED SURROUND SOUND "ON" if desired. The unit automaticallyreturnsto STOP mode when the end of the tape is reached. To stop play beforethe end of the tape is reached, press STOP/EJECT button. STOP When your recorder is operating in the PLAY or RECORD mode end the end of the tape is reached, yOur unitwill automaticallyshut itselfoff and return the buttons to their off position.
SELECTED RECORDING If you wish to record a particularselectiononlyfrom the compact disc, follow steps I through 3 above and: 1. Pressthe PLAY/PAUSEbutton on the CD Play_, then, press the PLAY/PAUSE button again to place the CD Player in the PAUSE mode. 2. PressSKIP FORWARD/REVERSE button until the Track number for the desired selection appears in the display. 3. Pressthe RECORDbutton on the Tape Recorder, and then the PLAY/PAUSE button on the CD player.
• • TAPE CARE Do not use cleaners or antistatic sprays on discs, such as those used on conventional analog phonograph records. Discsrotate at high speeds insidethe playe_. Do not use damaged (c_or warped) discs. CLEANING Do not expose your cassettes to direct sunlight or store them in hot places. High temperatures may warp the cassette shell or damage the tape itself. Keep your cassettes in their boxes when they are not in the cassette player/recorder. This keeps dust from entering the cassette shells.
and(2)Thisdevicemustacceptanyinterference received,includinginterference that may cause undesired operation. According to some State laws, and in the event service should be required, you may need both Model and Serial Numbers. Please recordthe Serial Number in the space below: In accordance with FCC requirements, changes or modifications not expresslyapproved by Thomson Consumer Electronics could void _ useCsauthority to operate this product. SERIAL NO.
Some of the following items may be available at your dealer or you may order by usingthe Accesssory Order Form. _TEREO HEADPHONE Lightweight Stereo Headphone with 3.5ram stereo plug No. 3-5750 $17.95 FOR HEADPHONE VERSATILITY, the following adapters includedat no extra charge. 1/4" adapter - Use lightweight headphone with other stereo products having 1/4" headphone jack. 3.5mm stereo to 3.5mm mono adapter - Permits headphone use with mono products having 3.5mm earphonejacks.
ACCESSORY :,O ON • (. • ......... ORDER . CAT.NO FORM PR,CS" Lightweight Stereo Headphone includes: 1/4" adapter and 3.5mm stereo to 3.5mm mono adapter 3-5750 $17.95 Stereo Headphone Pads (3 perJpk.) 5-1870 4.95 ea. For credit card purchases Yourcomplete charge card number, itsexpirationdate and your signature are necessary to process all charge card orders "Pricesare subject to change without notice. Total Merchandise ...................... $ SalesTax.............................
What does yourwarrant,/ • Anydefectin matedalor workmanship. For how long after the original purchase? • Oneyear. • Thewarrantyfo¢rentaJunitsbeginswiththe first r_mtal. What wilt we do? • Provide you with a new, or at our option, a reconditioned unit. • "n_ exchange unit is warranted for the remainder of your pmdu_'s original one-year warranty period. How do you make a warranty €laim? • Propedy pack your unit. Include any cables, etc., which were cciginany provided with the product.
2
Models RPo7975/RP-7978A, 347A7"778-.
