Owner's Manual

Compatible iPod, iPhone and iPad models
• iPodtouch(1st,2nd,3rdand4thgeneration)
• iPodnano(1st,2nd,3rd,4th,5thand6thgeneration)
• iPhone4
• iPhone3GS
• iPhone3G
• iPad2
• iPad
Note:
If your iPhone is called whileitisdocked,playbackwillbepaused.
Inserting your iPod / iPhone / iPad
1. InsertyouriPod/iPhone/iPadintotheconnectorinthedock.
2. Press the ON/OFF buttontoturnontheunit.EnsuretheiPod/iPhone/iPad/LINEINsourceisselected(theFM
RADIOindicatorshouldbeo)-toselectasource,taptheSOURCE button. Ensure you do NOT have a device plugged
intotheLINEINjack.
Note:
• TheiPod/iPhone/iPadwillchargeautomatically(untilfullycharged)onceitisdockedinthecradle(exceptifthe
unitisinRadiomode).iPodClassic(1Gand2G)willnotcharge.
• NotethatnotallfunctionsofsomeiPod/iPhone/iPadmodelscanbecontrolledviatheremotecontrolofthisunit.
Ifnecessary,operateyouriPod/iPhone/iPaddirectlybyusingitsscreen.
• WhenplayingiPod/iPhone/iPad,youcanusetheMENU, , or SELECT button on the remote control to enter the
menuofiPod/iPhone/iPadtoselect.
• DisconnecttheLine-incablewhenplayingiPod/iPhone/iPad.
Pausing playback
• Pressthe button.
• Toresumeplayback,pressthe button again.
Skipping to another track
• Presseitherthe or button according to the desired direction.
• Pressthe buttontoskiptothebeginningofthecurrenttrackorprevioustrack.Press buttontoskiptothe
beginningofthenexttrack.
Locating a particular point on a track
• Keepeitherthe or buttonpressedduringplaybackandreleaseatthedesiredpointinthetrack.
Note:
Please refer to the user’s manual that was included with your iPod/iPhone/iPad for more details.
LISTENING TO YOUR iPod / iPhone / iPad
WARNING:
• NEVERpulliPod/iPhone/iPadforwardorpush
backward.Thiscandamagetheunitandyour
iPod/iPhone/iPad.
• IfusinganiPod/iPhone/iPadwithacoveror
"skin",pleaseremoveitbeforedocking.
-4-
POWER SUPPLY
Using the AC adapter
UsinganACadapterotherthantheonesuppliedwiththeunitmaydamagetheunit.
Caution:
• Beforeuse,ensuretheratedvoltageoftheadaptermatchesyourlocalvoltage.
• TheincludedACadapterisforusewiththisunitonly.Donotuseitwithother
equipment.
• Ifyouarenotgoingtousetheunitforalongtime,disconnecttheACadapter
from the wall outlet.
• WhenevertheACadapterispluggedintoawalloutlet,electricityisrunning
through the unit, even when the power switch is turned o.
Removing the base stand
Hold the unit and slide down the stand (as shown).
Installing the base stand
Hold the unit and push the stand upward the rear of unit (as shown).
Caution:
Before removing or installing the base stand, ensure you disconnect all
cables(ACadaptorandLine-incable).
Mounting on a wall
The unit can be mounted on a wall by the mounting holes on the rear of the unit.
Caution:
• Mountingtheunitrequiresspecialskills thatshouldbeonlyperformed byqualied
personnel.
• Make sure that the wall mount is xed securely enough so that it meets safety
standards.
INSTALLATION
EN
AC adapter
To AC outlet
To “DC IN 9V” jack
Back view
Two mounting holes
[Use#4(Imperial)orM3(Metric)
pan head screws - not supplied]
6.5”
RPD160A_UL_BK_20110718.indd 4 7/22/2011 10:35:15