Owner's Manual

To adjust the volume
AdjusttheVOLUMElevelbypressingVOL+ or VOL- button.
Note: Press the MUTE button to turn o the sound (thepowerindicatorwillblink). Press the MUTE button
again or press the VOL+ / - buttons to unmute.
DockingyouriPod/iPhone/iPadwillenablea"Speakers"optiononyouriPod/iPhone/iPad(you’llnditunderthe
"Settings"menu onyouriPhoneor iPad).Thisoptionenablesyoutocontroltheunit’sAudioEQPresets(itdoesn’t
aectyouriPod’s/iPhone’s/iPad’sinternalEQPresets).TheEQPresetyouchosewillstayactiveontheunit–even
afteryouremoveyouriPod/iPhone/iPad.
VOLUME ADJUSTMENT
AUDIO EQ PRESETS
Connecting to LINE IN for other sound sources
YoucanconnectaudiodevicessuchasyourCDplayerorMP3playertotheunitviatheLINEINjack.Todothis,connect
anaudiocablefromthelineoutorheadphoneoutjackoftheotheraudiodevicetotheLINEINjackontherearofunit.
EnsuretheunittheiPod/iPhone/iPad/LINEINsourceisselected(theFMRADIOindicatorshouldbeo).
Note:
WhenconnectingtheLine-incabletotherearofunit.EnsuretheunittheiPod/iPhone/iPad/LINEINsourceisselected
(theFMRADIOindicatorshouldbeo).We recommend you unplug the device from the LINE IN jack when not in
use.
LINE IN CONNECTION
1. Press the button to turn the unit on.
2. Press the SOURCEbuttontoswitchtoFMRADIOmode(theFMindicatorwillturnon).
3. Tap the button to tune down radio frequency or tap the button to tune up radio frequency.
4. Adjustthevolumelevel.
Search to Next / Previous Station
Press and hold the / button (or / buttononremotecontrol)for2secondstosearchfornext/previous
available station.
Programming a Station to a Preset
• Usethe and buttons (or and buttons on remote control) to tune to a station.
• PressandholdtheSOURCE button on the remote control for 3 seconds to save it as a preset station.
Note: The unit can save up to ten stations as presets.
Selection of a Preset
Tap the / buttonontheremotecontroltoselectthenext/previousstationpreset.Youcanalsopressandholdthe
SOURCEbuttonontheunitfor1-2secondstorecalllast-usedpresetorincrementtonextpreset.
For Better Reception
Fullyunwindtheantennawire.Extendtheantennawireandplaceitinthepositionthatsoundsbest.
Note:
• DonotconnecttheFMantennatoanoutsideantenna.
• Ifyouwishtoresetyourunittoitsoriginalfactorysettings,pleasesimultaneouslypressandholdtheVOL- button
and SOURCE button for ve seconds in FM mode - the unit will reset and switch to standby mode.
LISTENING TO THE RADIO
EN
- 5 -
RPD160A_UL_BK_20110718.indd 5 7/22/2011 10:35:15