Manual
RS1285/1287 english US rev i 2/1/00 10:57 AM Page 12
.... (AMPR, FMPR, or LWPR.)
_ 4. If a different program location is preferred, press
®
__] 1 PRESETUP/DOWN to move to the desired preset
_/ I number (1-32).
5. PressSETto store the selected frequency at that
preset.
1 PressTUNERto select the radio
2 PressTUNERto select the next radio band
Choices are:
AM/FM (RCAmodels)
FM/MW/LW (Thomson models)
The tuner can be either TUNEor PRESETmode
When in PRESETmode, the PROGlight is on
Tip:Ycttraudio has32 statiGns.
syste_ preset
Tuning to a Station
Suppressing Stereo Signal
PressFM STEREOto toggle between FM mono and
stereo for stereo FM stations.
]
Tip: _ DIGITAL TUNING UP/
DOWN formore than1 secondto
automaticallytuneup/downthe band
forther_ staticm.
PressTUNING UP/DOWN to select frequencies.
1
Using Presets
PressTUNING UP/DOWN
to accessthe previous or next preset station The dis-
play first shows the preset program number and after
afew seconds, the fre-
quency and then the pre-
set program number
again, (FMP:01is FM pre-
set 1)
Auto Preset Programming
Pressand hold TUNER button for 2 second to scan sta-
tions in the selected band. The stations will then
stored as preset channels. Maximum 32 stations can be
stored. Beware of your preset channels being erased
accidentally because the scanning and storing process
isautomatic upon pressing TUNERbutton.
You can stop the automatic scan by pressing TUNER
button, but the erased stations cannot be recovered.
Setting Presets
1. PressTUNING UP/DOWN to accessthe desired
frequency.
2. Pressthe SET button once.
3. The most recently accessedprogram location will
be displayed together with a blinking program icon
Thomson models
Tip: RI_ stationsbroad-
cast on FM only. When
the tuner detectsan
RDS signal,the RDS
iconsturnscn.
Tuning to an RDSStation
1. PressDIGITAL TUNING UP/DOWN to search for
stations
2. If RDSstation found, RDSlights on display with sta-
tion name shown,
Displaying RDSStation Information
Toggle RDSI REPEATto display the frequency, station
name (PS),station type (PTY),clocktime (CT),or radio
text (RT)In CTmode, pressCTIINTROkey to replace
the displayed time by RDSstation time If clock time is
not yet set,this information will be shownas clock
time automatically
"...° .............................................................................................................................................................................. ...°"
_8