Manual

RS1285/1287 english US rev i 2/1/00 10:57 AM Page ii
Setting Up a CD Program
You can program the CDplayer to play up to any 32
tracks on the CDsin the tray.
1. While the CD player isstopped, pressSET to enter
PROGRAM mode. The
system displays the
next available program
number:"-- P:01,"
with "- -" flashing, prompts you for the first
track in the program list.
2, PressSKIP FORWARD/
BACKWARD to select a
track (press DISCSKIP or
DISK 1 - DISK 5 to select
atrack from a different
disc).
3. Immediately pressSETto
assign the selected track to the
program number. After 3 seconds,you
are prompted for the next track in the program list.
Displaying the Program List
1. While the CD player is stopped, pressSETto enter
PROGRAM mode.
2. PressSET repeatedly to list each track assignment
in the program list.
Deleting Program List
While in PROGRAM mode, pressand hold STOPfor 5
seconds.The system displays the mes-
___%_ sage CLEAR.
Skippinga
Disk
III PressDISC SKIR
Searching Through a CD
Playing a Program List
While in PROGRAM mode, pressPLAY.
Pressand hold SKIP FORWARD/BACKWARD to
searchthrough a CDas it is playing.
MsreTipson PlayingandSettingDzcgram:
DirectPlayfuncticn:PressD ISC 1-5 <r PLAY fQrdirectplayback
whenthe unitis in standby,£D,Tunerand Tapemode Hc_z_er,thisfunc
ticndes notactivate_ tropeisheingplayed
PressCD keyto seethetotaldisctimeafterreadir_thetotalno.of tracksin £Dstop
mode
During £D playback, press £D key to tcggle am3_ the displays of Track elapsed time,
track _ time, disc el_ed t_, disc rmnairir_ t_ and total runt_r of track
fcr the curr_m disc.
Ycucan createa prcgr_ of up to 32 tracks.
".°................................................................................................................................................................................°."
7