RCA Models: RS2531 RS2534 RS3531
RS2531-EN 3/6/01 2:51 PM Page 4 FCCInformation This device generates and usesradio frequency (RF) energy, and if not installed and used properly, this equipment may cause interference to radio and television reception. This equipment has been type tested and found to comply with the specifications in Subpart J of Part 15 of FCCRules.These rules are designed to provide reasonable protection against radio and television interference in a residential installation.
RS2531-EN 3/6/01 2:51 PM Page 5 Tuner FCC/Safety Information Installation .......... 2 Controls & Indicators Main Unit ............... Tape Player .............. Remote Control .......... 3 3 4 Display Tuning to a Station ....... 8 Using Presets ............ 8 Auto Preset Program (for FM only) .................... 8 Setting Presets ........... 8 Suppressing Stereo Signal ........................ 8 TapePlayer Showing the Demonstration ........................ 5 Display Alarm/Clock .......
RS2531-EN 3/6/01 2:51 PM Page 6 1 AM Loop Antenna Connector 2 Auxiliary Connector 3 Surround Speaker Jacks(Surround speakers included only with RS2534) 4 Main Speaker Jacks 5 Subwoofer Speaker Jacks 6 FM Antenna Jack Unpacking the system: You should have: • one main unit (with 2 speakers); • one remote control; • one AM loop antenna; • T-Type FM antenna wire; • one user's guide; • one safety leaflet • Owner and registration Card To ensure sufficient ventilation, keep the spacings shown below free fr
RS2531-EN 3/6/01 2:51 PM Page 7 Main Unit OPEN/CLOSE-- Opens or closes the disc tray. DISC 1 - DISC 5 -- Selects disc 1, 2.3.4, or5 DISC SKIP -- Skipsto the next CD in the tray STANDBY/POWER -- Turns power on or off (STANDBYmode). PHONES-- Jack for connecting head phones SOURCE-- Selectsthe CD player/ tuner/tape player/external source DEMOIDIMMEPdCD DISPLAY -Turns the feature demonstration on or off, adjusts display brightness.
RS2531-EN 3/6/01 2:51 PM Page 8 Remote Control POWER -- Turns power on oroff (STANDBYmode). TUNER -- Selects tuner CD -- SelectsCD player TAPE-- Selects tape player AUX --Selects external input.
RS2531-EN 3/6/01 2:51 PM Page 9 (9 Showing the Demonstration Activating the Timer Not operational in CD mode. PressDEMO/DIMMER to turn on/off demonstration mode. The demonstration scrolls through all display operations. Pressand release TIMER to turn on/off the alarm. The alarm is active when the clock icon indicator is lit. DISPLAY ALARM/CLOCK AdJusting the Display Brightness Setting the Time 1, PressCLOCK until the time flashes on the display, 2.
RS2531-EN 3/6/01 2:51 PM Page i0 Using Preset Equalizer Curves PressROCK/CLASSIC, CUSTOM/FLAT,POP/JAZZon the main unit or EQ on the remote to toggle among FLAT,ROCK, JAZZ,POP,CLASSICAL& CUSTOM. The display shows briefly the selection. Sub.Woofer PressSUB-WOOFER to turn on/off boosting the bass frequency. Muting Audio PressMUTE on the remote to cut Creating a Custom Curve the sound. (Remote Only) 1. PressCUSTOMfFLATto select CUSTOM mode. 2.
RS2531-EN 3/6/01 2:51 PM Page ii Repeating the Play Order DeJetin 9 Program List PressREPEATto repeat the current track, current disc, all discs,or turn REPEATmode off. While in PROGRAM mode, press and hold STOPfor 5 seconds, They system displays the messageCLEAR, Skipping a Disk Setting Up a CD Program PressDISC SKIP. You can program the CD player to play up to any 32 tracks on the CDsin the tray. 1. While the CD player is stopped, pressPROGJSET to enter program mode.
RS2531-EN 3/6/01 2:51 PM Page 12 Setting Presets 1. PressSKIP FORWARD/BACKWARD to accessthe desired frequency. 2. Pressthe SET button once. 1. PressSOURCEto select TUNER. 2. PressBAND to select between AM or FM radio band, Tip:Youraudio system has32preset staticss. 3. The most recently accessedprogram location will be displayed. 4. If a different program location is preferred, press SKIP BACKWARD I FORWARD to move to the desired preset number (1-32). 5.
RS2531-EN 3/6/01 2:51 PM Page 13 i!!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii[i__ Playing a Tape Tip"You csn playa tapefromeitherdeck. 1. PressSOURCE repeatedly to select TAPE. 2. PressSTOPIEJECTto open the cassette door. 3. Insert,a tape into the door and push the door closed. 4. PressREWIND/FAST FORWARD to position the tape to the desired starting position, (Deck 1 Only) 5. PressPLAY. From CD 1. Insert a tape into deck 1. 2. PressSOURCErepeatedly to select CD. 3.
RS2531-EN 3/6/01 2:51 PM Page 14 Solution Solution Check power cord for a secure connection. Check if something Unplug vibrate. the unit for a moment, and then plug into power source again. Check the outlet is causing the system to If so, move the system. Make sure the speakers are at least 3 feet away by plugging in another device. or on a different Increase the volume setting. Switch to another Check connection then to speakers.
RS2531-EN 3/6/01 2:51 PM Page 15 Handling CDs Safety Precautions • Never open the cabinet under any circumstances repairs or internal adjustments trained technician Any should be made only by a • Never operate this product with the cabinet removed • Do not touch the player with wet hands enters the player cabinet technician If any liquid for inspection The laser mechanism corresponds to the car tridge and stylus of a record player uct incorporates when operated Do not affix labels or adhesive
RS2531-EN 3/6/01 : 2:51 PM Page 16 RCA Audio System Limited Warranty What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • One year for labor and parts • The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do: • Pay any Authorized RCAAudio ServiceCenter the labor charges to repair your unit.
