Owner's manual

R32532-EN 5/2/01 4:31 PM Page 12
1. PressSOURCEto select TUNER.
2. PressBAND to select between AM or FM radio
band.
Tip:Ycuraudio has32 staticns.
system preset
Tuning to a Station
PressSKIP FORWARD/BACKWARD to select fre-
quencies.
Using Presets
The tuner can be either
TUNEor PRESETmode.
When in PRESETmode, the PROGlight ison.
PressSKIP BACKWARD or SKIP FORWARD on the
main systemor PRESETUP or DOWN on the remote
control to accessthe previous or next preset station.
The display first shows the preset program number
and after a few seconds, the frequency and preset
program number will be displayed. (FMPR:01 isFM
preset 1)
Manually Setting Presets
1. SelectTune using the PRESET/TUNEbutton. FM or
AM should appear before the frequency.
2. PressSKIP FORWARD/BACKWARD to accessthe
desired frequency.
3. Pressthe SET button once.
4. The most recently accessedprogram location will
be displayed.
5. If a different program location ispreferred, press
SKIP BACKWARD I FORWARD to move to the
desired preset number (1-32).
6. PressSET to storethe selectedfrequency at that
preset.
Suppressing Stereo Signal
PressFM STto toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
Auto Preset
Programming
(for FM only)
Pressand holdBAND
button for 2 secondsto scan stations in the FM band.
The stationswill then be stored as preset channels. A
maximum 32 stations can be stored. Beware of your
preset channels being erased accidentally because the
scanning and storing process isautomatic upon press-
ing the button. You can stop the automatic scan by
pressing any button, but the erased stations cannot be
recovered.
%°°°°................................................................................................................................................................................ ,'°
8