Owner's manual

R,32532-EN 5/2/01 4:31 PM Page 4
FCCInformation
This device generates and usesradio frequency (RF)
energy, and if not installed and usedproperly, this
equipment may cause interference to radio and tele-
vision reception.
This equipment hasbeen type tested and found to
comply with the specifications in Subpart J of Part 15
of FCCRules. Theserules are designed to provide rea-
sonable protection against radio and television inter-
ference in a residential installation. However, there is
no guarantee that interference will not occur in par-
ticular installations.
If this equipment does cause interference to radio or
television reception (which you can determine by
turning the equipment off and on), try to correct the
interference by one or more of the following meas-
ures:
Reorient the receiving antenna (that is,
the antenna for the radio or television
that is "receiving" the interference).
Move the unit away from the equipment
that isreceiving interference.
Plug the unit into a different wall outlet
sothat the unit and the equipment
receiving interference are on different
branch circuits.
If these measures do not eliminate the interference,
please consult your dealer or an experienced
radio/television technician for additional sugges-
tions.
Also, the Federal Communications Commission has
prepared a helpful booklet, "How To Identify and
Resolve Radio TV Interference Problems." This book-
let isavailable from the U.S.Government Printing
Office, Washington, DC20402. Pleasespecifystock
number 004-000-00345-4 when ordering copies.
This product complies with DHHSRules21 CFR
Subchapter J.Applicable at the date of manufacture.
For Your Safety
The AC power plug is polar-
ized (one blade is wider
than the other) and only fits
into AC power outlets one
way. If the plug won't go
into the outlet completely,
turn the plug over and try to insert it the other way.
If it still won't fit, contact a qualified electrician to
change the outlet, or usea different one. Do not
attempt to bypassthis safety feature.
CAUTION: TO PREVENTELECTRICSHOCK,
MATCH WIDE BLADE OF PLUGTO WIDE
SLOT,FULLYINSERT.
For Your Records
In the event that serviceshould be required, you may
need both the model number and the serial number.
In the space below, record the date and place of pur-
chase, and the serial number:
Model No.
Remote Control No.
Date of Purchase
Placeof Purchase
Serial No.
Service Information
This product should be servicedonly by those special-
ly trained in appropriate servicing techniques. For
instructions on how to obtain service, refer to the
warranty included in this Guide.
Have a Blast- Just Not in Your Eardrums _1%
Make sure you turn down the volume
on the unit before you put on head- )
phones, Increase the volume to the
desired level only after headphone are 't __<_
in place.
WARNING: TO PREVENT FIRE
OR ELECTRICAL SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK). NO USER-
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
A
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
MPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
SEE MARKINGON BOTTOM/ BACKOF PRODUCT
",, ................................................................................................................................................................................ ,"