This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC Information CD/MP3 Player MP3 Recommendations Gettinq Started Unpacking the DVD Receiver ......... 2 Unpacking the Speakers ............. Inserting Batteries into Remote Control Set Up and Maintenance of the Receiver .......................... Protect your Overheating 2 .3 3 .... 30 Playback ......................... On-Screen Display for MP3 playback...35 32 Radio the Radio to Audio-Visual ...................... 4 Digital Connection ................. Connecting Antennas ...............
Inserting Batteries into Remote Control Insert two AA(R6) batteries according to the + and - signs on the battery compartment. To use the remote control, _oint it directly at your receiver. Set up and Maintenance _ of the Receiver IMPORTANTNOTE • Provide spaces for sufficient ventilation as indicated below. If the space is insufficient, the unit may overheat resulting in malfunction and shorter life time. • Do not connect to the AC power tions are completed.
optical-or coaxialcableisneeded foreachSATreceiver, DVDplayerorCDplayer. Whenopticalorcoaxialcableis used,theanalog audio cables are still needed if recording through a tape or VCR is desired. This receiver provides one optical and one coaxial digital input for the connection of your components. Please connect your components (e.g. DVD, SAT or CD) to the appropriate digital inputs and select the appropriate source (see below).
Toeasespeaker connections, thespeaker cordsandtheterminalsarecolor-coded. • Red/Black (FrontSpeakers), • Blue/Black (Center Speaker) • Grey/Black (RearSpeakers). • Brown/Black (Subwoofer) Connect thespeaker wire(red/black wire)to thebackof L, Rfrontspeakers (red/ black terminals) and to the corresponding color terminals on the rear of the receiver. Do the same for center speaker (with blue/black terminal), rear speakers (with grey/black terminals) and the subwoofer (with brown/black terminal).
Positioning your speaker _1_ Left, Right (Front Speakers) They carry primarily music and sound effects Center In surround mode, the center speaker carries much of the dialogue as well as music and effects. It should be set between the left and right speakers. Surround (Rear Speakers) Their overall sound balance should be as close as possible to the front speakers. Proper placement is vital to establish an evenly distributed sound field.
Advanced Setting Alternative Surround Placement Rear wall If rear wall mounting is the only choice, aim the speakers at each other (A), towards the front (B) or even towards the sidewalls (C, D). Experiment with placement until surround sounds seem to envelop you, rather than coming from behind you. Courtesy Dolby Labot atories No adjacent walls Surrounds can go on stands facing each other to approximate the preferred sidewall mounting (A), or to the sides or rear of the viewing area aimed upwards.
Test Tone / Channel balance Channel balance Your receiver is equipped with a test signal generator for balancing the channels. As the signal "travels" from channel to channel, adjust the level controls until each channel plays at the same loudness level.
I I 7. _S._I]IaEI_.IE • To adjust BASSor TREBLE,pressrelevant button and turn the volume knob to adjust level. • Pressand hold for Random function in CD/MP3playback. 8. TI_E- / F/ISI"REVERSE • In tuner mode, pressto tune down on the radio frequency or pressand hold to to searchdown. • In CD and DVD mode, pressto fast reverse. Pressrepeatedly to vary the speed of fast reverse. • In pause mode, pressfor slow reverse. 9.
pressing any button. If it works, the red LED will light. 1. ONIOFF TOturn on or off the receiver and other auxiliary components (see page 14 "Using the Remote to Control Additional Components"). 2. Source Buttons TO turn on and select various audio/video 3. CH+, CH.
CHAP • Chapter location at which DVD is currently at AUTO • Auto programming in tuner mode is activated PROG.
Switching on/off To switch on the receiver, press POWER button on the receiver once to enter standby mode. Press SOURCE or POWER button on the receiver or one of the source buttons on the remote control to power on the receive£ • Standby: when the receiver is on, press the ON/OFF on the remote to return to standby mode.
3.Press andholdthecorresponding Source Button(like VCR1, SAT/CABLE, TV) on the remote while entering code from the code list using the Number Buttons. the 4. Release the component button, then press ON,OFF to see if the component will turn off. 5. If this does not work, repeat steps 3 and 4 by trying to use the next code (if available) listed for the brand of your component until the component responds to the remote command.
Sound Enhancement Systems This receiver is equipped enhancement systems. with several built-in sound Dolby Pro Logic II and Dolby 3 Stereo The Pro Logic H mode uses the built-in circuit to steer the Left, Center, Right and Surround left and right channel audio signals and uses all five speakers to play both stereo and Dolby Pro Logic program source, such as TV and VCR.
Input Signal Setting The receiver defaults to the most convenient your easiest use (see table). settings for By default, SAT (satellite) is set to analogue input. If you wish to change the input formats, follow the steps below: 1. Press SOURCE on the main unit until SAT appears on the display or press the SAT source buttons on the remote control. 2. Press DIGITAL on the remote control to toggle among optical/coaxial/analog to match your connection. Your selection will be stored automatically.
Fine Setting of the Speakers If you use all the speakers provided, have been set. all the basic settings However, to make the surround sound more effective and suit the acoustic conditions in your listening room, you need to delay the signal from some of the speakers. Such channel delay compensates for center or surround speakers that are closer to listening position than the front speakers. You can make use of the SOURCE button to adjust the speakers' relative loudness.
Speaker Icons The receiver shows you the speakers' settings with the following icons: on the display Displaying Program Formats When a digital source is playing, the receiver will automatically switch to the proper surround mode and indicates on the speaker icons on the right-hand side of the display. (See diagram) It is important to note, however, that not all Dolby Digital sources are encoded with the full complement of five channels plus LFE*.
BasicPlayback Features 1. Press SOURCE on the main unit until "DVD/CD" appears on the display or DVO source key on the remote to select DVD/CD input source. 2. Open disc tray for loading discs with label side facing up. Press again to close it. 3.
On-screen banner display You can access the on-screen banner display during playback to select many playback features. Each feature is illustrated with an icon. However, each banner display feature is available only if the disc was created with that particular feature. An invalid icon appears on the screen when you select an icon that does not function. Also, the icon is "grayed out" to tell you so.
Selecting a title 1. Refer to previous page "General use" to open the title menu. 2. Enter title number using the number keys on the remote control. Add 0 in front of single*digit title number (e.g. 9 = 09). Selecting a chapter 1. Refer to previous menu. page "General use" to open the title 2. Enter chapter number using the number keys on the remote control. Add 0 in front of single-digit chapter number (e.g. 9 = 09) Selecting audio language 1. Refer to the previous page "General title menu.
Using bookmarks The bookmark feature allows you to mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks. Addingbookmarks 1. Refer to Page 20 "General menu. use" to open the bookmark 2. Use the arrows on the remote to move the cursor (yellow frame) to the "Mark" check line, then press OK to add bookmark when you reach the scene you want to do so. 3.
Repeat (During Playback Only) 1. During playback, press the RPTIPGM button on the main unit or SHIFT and 7/REPEAT repeatedly on the remote control to select among the repeat modes - Repeat Disc > Repeat Title > Repeat Chapter > Repeat Off > (Repeat Chapter). Selected mode is displayed in the banner display on screen. Program playback Edit program 1. In stop mode, press and hold RPT / PGM on the main unit or SHIFT and 9/PROGRAM to display program edit playlist.
3.UsetheLEFT and RIGHT arrows to select Title or Chapter, then the UP and DOWN arrows to select the number. 4. Use the LEFT and DOWN arrows to highlight and then press OK. "Insert" 5. Use the arrow buttons to highlight "Play" (start program playback) or "Done" (return to normal playback with program saved) and then press OK. Cancel program Program will be cancelled when; 1. disc tray is opened; 2. power is turned off; 3. STOP is pressed twice.
Set up menu General use 1. Press MENU in stop mode to display the set up menu on screen. The menu shows current settings. 2. Use arrow buttons to highlight options open selected menu. and press OK to 3. Press LEFT arrow to go back to the previous menu or press GO BACK,DISC to exit the setup menu completely.
4.Enterlanguage codeintoboxes andthenselectOKto returnto mainmenu.Press OKbuttonontheremote. Menu language This step will define the language short messages shown on screen, 1. Refer to page 25 "General menu. use" of menus and other to open menu language 2. Use the UP and DOWN arrows to scroll the selections and select the language and then press OK to return to main menu.
Rating (Parental control) This step will disable the playing of some DVDs (especially U.S. type) which are not suitable for some audience, e.g. children. Such kind of DVDs is encoded with a specific rating level. If the rating level of the disc is higher than the preset level (to be set in this step), the playing will be prohibited unless the password (see next step) is entered. 1. Refer to page 25 "General use" to open the rating menu. 2. Select "Rating" and then press OK to return to main menu.
4.Usethenumberbuttonsto enternewpassword and thenpress OK. 5.Repeat theabovestepto confirmpassword and to password menu. main menu. Use the LEFT arrow to return return to the Clearpassword 1. Refer to page 25 "General menu. 2. Use the number press OK. buttons use" to open the password to enter password and then 3, Move up or down the menu using the UP or DOWN arrows and select "Clear Password".
TV aspect This step selects the TV aspect, wide-screen ventional (4:3). 1. Refer to page 25 "General menu. (16:9) or con- use" to open the TV aspect 2. Use the UP or DOWN arrows to select TV aspect and then press OK to return to main menu. If you have a wide-screen Widescreen ".
Loading and playing an audio CD 1. Press STOP/EJECT button on the front panel to open the disc tray. Place disc on the disc tray with the label side facing up. Press STOP/EJECT again to close disc tray. The disc will be read to detect MP3 CD has been inserted, whether an audio CD or 2. Playback begins automatically after the disc has been read, An audio CD _ or MP3 icon f_ will show on the left of the display. 3. Press PLAY/PAUSE on the main unit or PAUSE on the remote control to pause playback.
4. Press SKIP REVERSE remote to return WARD on the the next track, on the to the main unit main previous unit track, or CH- on the Press SKIP or CH + on the remote FOR- to go to 5. Press STOPIEJECT on the main unit or STOP on the remote control to end playback. Quick scan 1, Press and the main unit scan through hold FAST FORWARD or FAST REVERSE or FORWARD or REVERSE a track during quickly playback.
Selecting a track 1. Refer to "Genera/use" menu, to open the track 2, Enter track number, Add 0 in front of single-digit number (e.g, 9 = 09), track IntroScan (0nly for audio CDs) IntroScan plays the first few seconds of each track. 1, Refer to "General use" to open the IntroScan menu, IntroScan will start automatically after you have pressed OK. 2. Press OK again, PLAY or PLAYIPAUSE on the main unit to end IntroScan. The track that you stopped at will be played normally.
Bookmarks (Audio CDs Only) The bookmark feature allows you to select certain points on the disc where you want to jump to quickly. 9 bookmarks can be selected. AddingBookmarks(AudioCOsOnly) 1. Refer to "General bookmark menu. use" on page 32 to open the 2. Use the arrow keys to move the cursor (green frame) to the "Mark" check line, then press OK to add bookmark when you reach the point you want to do so. 3.
4. Repeat steps 2 and 3 to add additional tracks to the program. 5. Move to highlight "Play" (start program playback) or "Done" (return to normal playback with program saved) and then press OK to confirm program playback. DeleteProgram 1. In stop mode, press and hold RPT I PGM on the main unit or SHIFT 9 I PROGRAM on the remote control to display program edit playlist. 2.
Filemode 1. Use the UP or DOWN arrow select the file buttons on the remote to you wish to begin playing. 2. Press PLAY on the main unit or on the remote control to start playback. If you are currently playing, then press OK button to select a different MP3 to play. All the files or folders will be played starting with the one you have selected. Playback stops when all files have been played.
5,Press STOP or RPT / PGM on the main unit or STOP or SHIFT 9/PROGRAM to end program playback. 6. To play program again, press and hold RPT I PGM on the main unit or SHIFT 91PROGRAM while in stop mode to reactivate program playback. Press PLAY to begin. Deletea specificFileor FolderfromProgramList 1. In stop mode, use the LEFT or RIGHT arrows to select program list, then use the UP or DOWN arrows to select file to be deleted and press CLEAR to delete. DeleteAll 1.
Operating the Radio The receiver has a built-in radio function, tuner that allows for AM/FM Manual tuning 1. Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details) 2. Press POWER on the main unit. 3. Press SOURCE until tuner mode is selected or press AMIFM on the remote control. 4. To select band, press the BANDIAPP on the main unit or AMIFM button on the remote again to toggle between AM/FM mode. When an FM station broadcast Stereo sound, ST is displayed.
3.Press MENU on the remote control. "PROG" will appear on the display 4. While the word "PROG " is still flashing, input your desired preset number (1-30) using the numeric keys on the remote control to store the radio station. Retrievingpresetstations 1. Press SOURCE on the unit or AMIFM control to enter tuner mode on the remote 2. Press PRESET + or PRESET - on the unit or CH+ or CH on the remote control to tune up or down preset channels.
% % %
Equipment Specifications RTDVDI: AMPLIFIER SECTION: All S channels: RTDVDI: each 32W at 6 ohm. 010% THD @1 kHz Subwoofer channel: 40w at 6£2 Muting Attenuation: 65dB Frequency Response: 40Hz to 20kHz +/-3dB Signal to Noise Ratio: 65dB (Bypass mode) VIDEO SECTION: Input ( Sensitivity/Impedance ):lVp-p/75ohm Output (Level/Impedance): lVp-p/75 ohm Frequency Response: 10Hz to 6MHz at +/- 3dB Signal to noise ratio: 40dB Crosstalk @3.
Disconnect theaudiosystem fromthepowersource before performing anymaintenance. Cleaning Clean the exterior of the system using a soft dust cloth. The player CAUTION! This system operates with a laser. It must be opened by only a qualified technician. • Never move the player during playback. • Never put more than one discs on a tray or put a disc slipping out of the guide area. Handling discs • Do not touch the signal surfaces. • Hold discs by the edges, or by one edge and the hole.
2131 2026 2027 2002,2026 2003, 2004, 2006, 2007, 2008, 2111, 2112, 2021 2013 2009, 2010 2014 2011 2013 2012, 2025 2014 2013, 2014, 2016, 2016, 2017, 2018,2019 2021, 2022, 2114 2020, 2110 2062 2027,2061 2013, 2014, 2016, 2016, 2017, 2018,2019,2027 2009 2061 2013, 2014, 2023, 2061 2000, 2002, 2009, 2013, 2016, 2018, 2021, 2022, 2024, 2116 2013 2015, 2017, 2019, 2025, 2026, 2027, 2028, 2110 2110 2009, 2010 2000 2002,2026 2014, 2029 2014 2002, 2012, 2014, 2015, 2021, 2024, 2026, 2026, 2029,2030,2032,2033,2034,2
2002, 2011, 2013, 2014, 2021, 2023, 2026, 2104, 2131 2029, 2065, 2113 20!3 2053 2055, 2056, 2107 2029, 2055, 2056, 2065, 2066, 2067, 2069, 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123 2075,2131 2021,2131 2002,2013,2028 2002, 2013, 2016, 2026, 2053, 2061 2009, 2010, 2011, 2016, 2018, 2058, 2064, 2076,2078,2079,2111,2123 2014 2013 2021 2014, 2131 2096 2035 2021, 2022, 2109, 2125, 2126, 2127 2016, 2055, 2056, 2107, 2120 2018 2021,2022,2062,2063 2021, 2062, 2096, 2124 2014 2010, 2055, 2080, 2061, 2123 2016, 2
1008 1176 1002 1004 1006,1008, 1189 1004 1038 1038 1174 1002 1004 1006,1008, 1074 1075,1076, 1183 1184 1033 1038,1189 1173 1003 1178 1054 1038,1046 1019,1062,1068,1069, 1077,1088,1116,1161, lOO4 1008,1054 1004 1038 1005,1006, 1046,1076, 1008,1012,1013,1016, 1082,1083,1105,1170, 1006 107%1072, 1160,1162 1089,1105,1109,1117, 1171 1117 1004 1049 1118 1171 1052 1066 1004 1174 1000 1033 1076 1087 1182 1005,1006 1001,1004, 1046,1052, 1083,1087, 1005,1006,1019,1024, 1062,1089,1074,1075, 1088,1095,1119,11
For audio track and subtitle selection, see p.25,26.
Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
What your warranty covers: • Defects in materials or workmanship.
