Manual

Test Tone / Channel balance

Channelbalance

Your receiver is equipped with a test signal generator for

balancing the channels. As the signal "travels" from chan-

nel to channel, adjust the level controls until each channel

plays at the same loudness level.

Please refer to "Fine setting your speaker" section for more

details.

Courtesy Dolby Laboratories

Leveladjustment & surroundchannel level

expectation

Even though you adjust the surround channel to be as loud

as the others on the test signal, youql find that on actual

program material the surround channel is usually much

lower than the front. Don't be tempted to readjust the sur-

round level; program producers use surround mostly for

subtle atmosphereics and ambience, and only rarely for

special effects, A good surround mix doesn't call attention

to itself; if it did, it would soon become distracting,

BD [ DOLBY I DolbyDigital

Manufactured under

license from Dolby

D _ _ ! T A L Laboratories. "Dolby",

"Pro Logic" and the dou-

ble-D symbol are trademarks of Dolby Laboratories.

Reserved,

D i G I T A L Manufactured under license from

Digital Theater Systems, Inc. US Pat. No.

5,451,942, 5,956,674, 5,974,380,

5,978,762 and other world-wide patents

issued and pending. "DTS" and "DTS Digital Surround"

are registered trademarks of Digital Theater Systems,

SURROUND