Manual

• Use .rap3 as the extension when converting
audio files into rap3 for saving onto CD-R(W)or
CD-ROM, e.g. RockyO&mp3. Do not use any other
extension e.g. ,doc, .pdf
• Do not use the .rap3 extension for other text or
non-audio data files as this may result in serious
malfunction and harmful noise interference.
• Most commonly available CD creation software-
can make files compatible for the system but do
not forget to finalize your disc after creation. This
set cannot read DirectCD recordings.
•In order to get audio CDquality, you need to
record your MP3 CD at 128 kbps. You can record
up to 256 kbps. Beyond 256 kbps, the unit might
not read the CD.
• Do not combine CDAudio and MP3 tracks onto
a CD-R(W) or CD-ROM. Theplayer will only
playback CD audio tracks from mixed CD formats.
Loading and playing an audio CD
1. Press OPEN/CLOSE on the front panel to open the disc
tray. Place the disc on the disc tray with the label side
facing up. Press OPEN/CLOSE again to close disc tray.
2. Press DISCSKIP or 1-5 on the remote control to select
anotherdisc.The disc will be read to detect whether an
audio CD or mp3 CD has been inserted.
• !f over 400 item s (songs!folders) are on the disc,
only the first 4Oosongs can be p!ayed,
• Resume function does not operate in MP3 mode.
2. Playback begins automatically after the disc has been
read.
An audio CD !_:C_!] or mp3 icon will appear on the
display.
3. Press PLAY/PAUSE on the main unit or PAUSE on the
remote control to pause playback. PressPLAY/PAUSE again
on the main unit or PLAY on the remote to resume normal
playback.