VCR User Manual

Express Recording
Express Recording (XPR) lets you record up to four
hours without programming the timer. It also allows you
to start (or continue) recording immediately or to delay
recording up to 24 hours. When the recording isfinished,
the VCR will turn off automatically.
Note: Although you do not have to program the timer,
the clock must be set before you can Express Record.
Only two buttons are used to Express Record:
O
START XPR LENGTH
IMMEDIATE START
If you want the VCR to start recording immediately
or to continue a recording you've already started,
follow the simplified instructions at the right labeled
"Immediate Start".
I
DELAYED START
If you want the VCR to delay recording, follow the
simplified instructions at the fight labeled "'Delayed
Start".
Simplified Instructions
Immediate Start
t. Press LENGTH tat least twice) to select
desired recording time [0:30 130 minutes';, to
4:00 (4 hours)].
Delayed Start
1. Press START lCIock will skip to next haft-
hour _.
2. Keep pressing START until desired start time
appears in display.
3. Press LENGTH to select desired recording
time [0:30 (30 minutes) to 4:00 (4 hours)].
4. Press POWER to turn off VCR.
_To Cancel Delay ed-Start.XPR-----i
(Before Recording Be_)
• Press LENGTH until the display shows 0:00. [
1
To Stop .XPR
(After Recording Starts)
• Press LENGTH until display shows 0:00.
_or--
• Press POWER and then STOP within ten
seconds.
(_INSERT CASSETTE
EWIND IF NECESSARY.
Detailed Instructions
) SET TO TUNER. SET SPEED
PRESS START for DELAYED XPR
)mit for Immediate Start (See note below).
SELECT CHANNEL.
I SET LENGTH OF
RECORDING.
(See note below)
TURN OFF VCR FOR DELAYED START XPR.
(Leave on for immediate recording)
TURN LIGHT ON TO VIEW WHILE RECORDING.
Note for Step(_)
• The first time you press the START button, XPR
will appear in the display and the clock will skip to
the next half-hour. Examples: If you press the
button at 9:35 AM the clock will skip to 10:00
AM; if you press it at 8:15 PM the clock will skip
to 8:30 PM.
• Each additional time you press START, the clock
will advance another 30 minutes. The time that is
displayed is the time when the recording will start.
• After you have set the starting time, you must set
LENGTH within 8 seconds. Otherwise, XPR will
disappear and the clock will return to the actual
time. Then you must reset the start time. (See note
(_)for setting LENGTH.)
Note for Step(_)
• Press the LENGTH button at least twice. The first
keypress only starts the XPR recording; it does not
advance the recording length.
• Increase the recording time by pressing the
LENGTH button additional times. The clock
display shows the amount of recording time you
have set. [from 0:30 (30 minutes) to 4:00 (4 hoursI]
• The time remaining is constantly displayed during
XPR. You can extend the time whenever you want
by pressing LENGTH.
• When the recording time has expired, the VCR
turns off and the clock display returns to current
time.
23