Manual

BACK PANEL
3 CH. 4 Switch Selects the channel to which you will tune the TV to see the VCR picture if you
connect the VCR using one of the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another component, like a VCR or camcorder,
when it is connected to these jacks. Use INPUT on the remote to select.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to another component, like a TV or VCR,
when it is connected to these jacks.
IN FROM ANT. Jack Receives a signal from an antenna or cable system when attached.
OUT TO TV Jack Passes signal to TV using the cable supplied.
I
INDICATOR PANEL
POWER _ VCR Q TIMER • RECORD
I
POWER indicator Lights when the VCR is turned on.
RECORD Indicator Lights when the VCR is recording.
TIMER Indicator Lights during an express or timer recording, or when the VCR is set for a
timer recording and the VCR is turned off. Flashes when the clock is not set.
Flashes when a timer recording is set and there is no cassette in the VCR.
VCR Indicator (Applies Only if the VCR Viewing Channel is 3
or 4). Press the TV.VCR button to turn on or off.
• VCR indicator on: Picture from VCR.
• VCR indicator off: Picture from TVchannel.
41