Manual

STEP 5: TUNE THE TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input.
• If you connect your VCR using the ANTENNA connectors with
RFantenna cable, set the 3CH.4 switch to channel 3 or
channel 4--the channel you want to use on your TV.
• If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select the TV's video input to see the
signal. See the TV Owner's Manual.
STEP 6: TURN ON THE VCR
Press POWER to turn on the VCR.
STEP 7: INTERACTIVE SETUP
The first time the VCR is turned on, Interactive Setup--a brief
series of on-screen menus--appears. These menus assist in setting
up several of the VCR's features. Use the remote's number
buttons to select options.
1. Press 1 for English, 2 for Espafiol (Spanish), or 3 for Fran_ais
(French).
Select a language.
Seleccione un idioma.
Choisissez une langue.
1>English
2 Espa6ol
3 Francais
The remaining Interactive Setup menus will appear in the
language you choose. Follow the on-screen instructions to
complete the process.
VCR Viewing Channel
When using the ANTENNA jacks to
connect your VCR, tune your TV to
channel 3 or 4.
When using the audio/video jacks to
connect your VCR, tune your TV to the
TV's video input.