video cassette recorder user's guide VR529 q-q\ooot9
kvAV'J_!_qi_[_ RISKOF ELECTRIC SHOCKDO NOT OPEN To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. i _1 his symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. Caution: This symbol instructions indicates important accompanying the product. To reduce the risk of electric shock, match wide blade of plug to wide slot, fully insert.
First Thing Setting First ............................................................... up the VCR ......................................................... Using the QuickSet Guide .................................................................. 3 7 8 Using the Menu to Set Up Features ................................................. 8 Language .......................................................................................... 8 Cable Box Setup ...........................................
Programming To Control the Remote ............................................ a TV .................................................................................. To Control a Satellite Receiver or Cable Box ............................. 38 Other Features .............................................................. 35 36 39 Picture Search Options ..................................................................... 40 Forward and Reverse Search ................................................
HI, MY NAME IS SUSAN... FIRSTTHINGS and I wrote that And, this User's Guide. you have a rewarding I think you'll can be accessed READ THE The first three you to yourVCR, through with FIRSTTHREE sections V experience. the features the on-screen that menus. V SECTIONS of the manual introduce and show you how to set theVCR up and use the on-screen sections It's my job to see user manual be pleased FIRST menus.
STEP 1: UNPACK The following IN THE BOX items come packed in the box: • VCR • Remote control • RF coaxial cable STEP 2: INSTALL REMOTE WHAT'S BA'I-I'ERIES IN THE CONTROL Follow these steps whenever you need to install or change the batteries in your VCR remote. 1. Remove the cover of the battery compartment. 2. Place batteries in the remote, each battery to the diagram 3. matching the + and - ends of inside the compartment. Replace the cover.
STEP 4: PLUG IN THE VCR Match the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely. STEP 5: TUNE THE TV Tune the TV to the VCR viewing channel. The VCR viewing channel is channel 3 or 4 or the TV's video input. If you connect your VCR using the ANTENNA connectors with RF coaxial cable, set the 3CH.4 switch to channel 3 or channel 4--the channel you want to use on your TV.
1. Press MENU to bring up the VCR MAIN MENU. VCR MAIN MENU 1VCR PLUS+ 2 TIMER RECORDINGS 3 TIME 4 CHANNELS 5 PREFERENCES 6 LANGUAGE D 2. EXIT Press 5 to display the PREFERENCESmenu. PREFERENCES 3.
ON-SCREEN SET-UP The GUIDE ADDITIONAL FEATURES QuickSet Guide takes you through VCR.
USING TH E QUICKSET GUI DE The QuickSet Guide is an automated procedure that helps you set up your VCR. The first time you turn on your VCR, the first screen of the guide appears. SELECT A SELECCIONE CHOISISSEZ I 2 ENGLISH ESPANOL 3 FRAN_AIS Just follow LANGUAGE. UN IDIOMA. UNE LANGUE. the step-by-step procedures until setup is complete. Some of the feature options may not apply to your VCR configuration. If the menu does not appear: • Make sure TV is tuned to the same channel as the 3CH.
1. 2. Press MENU to display the VCR MAIN MENU. 1 2 3 4 5 6 VCR MAIN MENU VCR PLUS+ TIMER RECORDINGS TIME CHANNELS PREFERENCES LANGUAGE 0 EXIT Press 6 to select and display the LANGUAGE menu. LANGUAGE SELECT A LANGUAGE. MENU TO lPENGLISN 2 ESPANOL 3 FRAN_AIS PRESS 3. CONTINUE Select English, Espafiol (Spanish), or Fran_ais (French). CABLE BOX SETUP This setup applies only when all channels are received through the cable box.
. Press 5 to display CABLE BOX SETUR Then select one of the three choices. CABLE DO YOU BOX BOX USE TO SETUP YOUR CABLE RECEIVE CHANNELS ALL OR ONLY SOME CHANNELS? , I ALL CHANNELS 2 ONLY SOME 3 CANCEL CHANNELS SETUP If you selected ALL CHANNELS, enter the output channel of your cable box, usually 03, 04, or video line input and press MENU. CABLE ON WHAT THE FROM BOX SETUP CHANNEL VCR THE RECEIVE CABLE (USUALLY 3. CABLE 4.
2. Press 4 to display the CHANNELS menu. CHANNELS 3. 1 AUTO 2 ADD/REMOVE CHANNEL 3 SIGNAL 4 VCR 5 CABLE 0 EXIT TYPE: PLUS+ CABLE CHANNEL BOX LIST SETUP Press 1 to display the AUTO CHANNEL SEARCH menu. AUTO WHAT CHANNEL TYPE ARE YOU 1 CABLE 2 ANTENNA OF 0 SEARCH SIGNAL USING? TV 3>DETECT 4. SEARCH CHANNELS AUTOMATICALLY CANCEL Select one of the three AUTO CHANNEL SEARCH options. Choices one and two are self-explanatory.
To Change the Signal Type 1. Press MENU to display the VCR MAIN 2. Press 4 to display the CHANNELS 3. Press 3 to change MENU. menu. the SIGNAL TYPE between CABLE and ANTENNA. To ADD or REMOVE You may want CHANNEL Channels to add or remove SEARCH, especially channels if some of the channels signals or you don't want to watch Press MENU to display the VCR MAIN 2. Press 4 to display the CHANNELS 3.
AUTO CLOCK SET FEATURE The Auto Clock feature is set to ON at the factory. In the ON setting, the VCR looks for a channel carrying XDS (Extended Data Services) information Coordinated and updates the clock using the Universal Time. There are certain steps that are required, such as Auto Channel Search, Time Zone, and Daylight Savings, before the Auto Clock feature works. SET THE TIME 1. Press MENU to display the VCR MAIN MENU. VCR 2.
SET DAYLIGHT SAVINGS 1. Press MENU to display the VCR MAIN 2. Press 3 to display the TIME menu. 3. Press 4 to display the SET DAYLIGHT SET DAYLIGHT DOES YOUR FROM SAVINGS menu. SAVINGS AREA DAYLIGHT MENU. OBSERVE SAVINGS APRIL TIME OCTOBER? IS OBSERVED TO CONTINUE I YES. DST 2 NO 3_AUTOMATIC PRESS MENU TO 4. Select one of the options. • DST is the acronym for Daylight Savings Time.
. Press 1 to display the SET TIME AND DATE menu. SET TIME TIME AND DATE --:-(HH:NM) bATE --/--/-- PRESS . MENU TO CANCEL Enterthe data usingthe number buttons.Press0 before single-digit SET numbers TIME AND TIME 12:34 DATE 11/18/97 PRESS PRESS and follow the on-screen directions.
VCR PLUS+ WORKSHEET Broadcast or Cable-TV Station Name VCR Plus+ Channel Number** HBO 33 ESPN 34 Channel Number You Receive the Station On* Two-DigitVCR Numbers Plus+ Channel for Cable TV (USA List) 35 American 39 Arts Movie Classics 57 Black Entertainment 54 Bravo 42 Cable 45 Cinemax 98 Cinemax 37 The Discovery 53 The Disney 63 Entertainment 34 ESPN 47 The Family 33 Home Box Office 95 Home Box Office 2 96 Home Box Office 3 51 The 46 Lifetime 58 The 48
3. Press 4 to display the VCR PLUS+ CHANNEL LIST screen. VCR+ CHANNEL MY 5 -- 4 -> -> -> -- 1 -- CH+/- TO SELECT TO CHANGE 0-9 PRESS MENU TO List) -- 2 PRESS Plus+ Channel for Cable TV (Canadian -- 3 USE Two-DigitVCR Numbers CHANNEL 67 Allarcom PayTelevisionl Superchannel SAVE 44 Arts 72 Cable & Entertainment News Network-Headline News Network News , Enter the data following worksheet.
2. Press 5 to display the PREFERENCESmenu. PREFERENCES 1 REMOTE 2 AUTO PLAY: CONTROL: VCR1 OFF 3 4 AUTO FRONT TV/VCR: PANEL: OFF AUTO 0 EXIT Now you are ready to select an item from the menu to set up. REMOTE VCR1/VCR2 OPTION If you own a compatible RCA, GE, or ProScan remote that has a VCR2, VCR2.LD, or DVD.VCR2 button, this feature allows you to set this VCR to respond to that button. Press 1 to select the REMOTE CONTROL item. Then press the VCR2, VCR2-LD, or DVD°VCR2 button to change.
Select ON if you want a tape with its safety tab removed to start playing automatically when the tape is inserted. Select OFF if you do not want a tape with its safety tab removed to start playing automatically. AUTO TV/VC R This feature controls whether the TV/VCR switch changes automatically to the VCR mode, when the VCR is turned 3 to switch between ON and OFF. on. Press Select ON if you want the VCR to switch to the VCR mode when the VCR is turned on or a cassette is inserted.
LEARN YOU THE STARTED TheseVCR begin yourVCR. functions, recording However, enhance playing a program there necessary more be enough Learning a recorded should are other the enjoyment to learn reading. basics should enjoying control aren't BASICS TO GET features of yourVCR, yourVCR, the remote tape, and do just that. to get you started.
REMOTE BUTFONS The remote control is capable of controlling VCR, and if you have compatible components, more than just your RCA, ProScan, or GE you may be able to control them without even having to program the remote. POWER VCR COMPONENT BuTroNs POWER Turns off VCR when remote is set to control the VCR. Also turns some compatible SAT CABLE components Turns on a compatible on and off.
MENU Brings up VCR MAIN MENU on the TV screen. Used to select a menu item or exit a menu. Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 -two numbers. appears on the screen. Then press the other PAUSE Pauses playback or recording. Press PAUSE again to return to playback or recording. PLAY Plays a tape. POWER Turns the VCR on and off. RECORD Starts VCR recording. Also used for express recording.
MUTE Reduces volume to minimum Numbers (0 through level. 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 -two numbers. appears on the screen. Then press the other POWER Turns the TV on and off. VOL Up and Down Raises and lowers sound of TV. PLAYI NG A TAPE 1. Tune the TV to your VCR viewing channel (3, 4, or TV's video input). 2. Insert a tape in the VCR.
TAPE EJECT Press STOP-EJECT on the VCR when it is stopped to eject the tape. RECORDING If you want to record something that you're watching, you can use basic recording. . Set the tape speed by pressing the SPEED button on the remote (see margin note for information about tape speed settings). 2. Press the RECORD button to begin recording. 3. Press STOP on the remote (STOP,EJECT on the VCR) to stop recording.
SEVERAL Now that RECORDING you've steps to operate different Recording • gone through yourVCR, recording to suit your OPTIONS the necessary I'll explain features that the V are available needs.
RECORDING FEATURES There are four ways to record programs: • Recording program. • Express lets you press one button to start recording (See VCR Basics section.) Recording are watching, recording • Timer lets you start recording after a designated Recording period lets you program Timer Recording just by entering of time. the VCR to automatically time. the VCR a PlusCode number found in some TV guides.
TIMER RECORDING You can set up as many as eight timer recording 1. programs. Press MENU to display the VCR MAIN MENU. VCR MAIN MENU 1 VCR PLUS+ 2 TIMER RECORDINGS 3 TIME 4 CHANNELS 5 PREFERENCES 6 LANGUAGE 0 2. EXIT Press 2 to displaythe TIMER RECORDINGS TIMER 3. menu. RECORDINGS I CREATE A 2 REVIEW EXISTING 3 USE 0 EXIT VCR NEW PROGRAM PROGS. PLUS+ CODE Select I to CREATE A NEW PROGRAM.
Review the information . to make sure it is correct, and then press MENU to save. PROGRAM 1 (ONE CHANNEL 03 START END TIME TIME START DATE TAPE PRESS CLEAR PRESS MENU TIMER PM 09:30 PM 2=SLP TO CORRECT TO TURN THE TO THE WITH BEEN SAVED INSERT TAPE VCR PROGRAM PRESS SAVE RECORDING HAS RECORDABLE FRI SLP I=SP 1 REMEMBER CABLE 08:00 10124/97 SPEED PROGRAM TIME) OFF START MENU TO A AND BEFORE TIME.
. Enter the VCR PlusCode shown in your local television programming guide. VCR ENTER PLUS+ PLUSCODE (FROM TV NUMBER LISTING) 12876 4. PRESS CLEAR PRESS MENU TO CORRECT WHEN DONE Press MENU to enter the VCR PlusCode number. HOW OFTEN SHOULD PROGRAM RECORD? . I ONE 2 DAILY 3 WEEKDAYS 4 WEEKLY 0 CANCEL THIS TIME (EVERY DAY) (M-F) (ONCE PER WEEK) Indicate how often you want the program recorded.
STOPPING A TIMER RECORDING To stop or cancel a timer recording in progress (even an express recording): • Press and hold the STOP button button on the remote (STOP,EJECT on the VCR) for a few seconds. REVIEWING AND CLEARING PROGRAMS To review programs that you have already set up: 1. Press 2 when the VCR MAIN MENU is displayed to display the TIMER RECORDINGS menu. TIMER .
USING TWO VCRS FOR COPYING AND EDITING TAPES Use one VCR as the playback recording VCR and the other as the VCR. 1. Turn on the TV and VCRs. . Tune the TV to the VCR viewing channel (either 3, 4, or TV's video input). . If you connected recording your VCR using the ANTENNA jacks, tune VCR to channel 3 or 4--the one selected on the back of the playback If you have connected VCR. your VCR using the audio/video press INPUT on the recording input.
'.
CONTROL YOUR COMPON ENTS... OTHER a V to be programmed. V The remote can be programmed television and cable box. It is programmed ProScan TV manufacturer's to control or satellite brands an RCA, receiver.
ABOUT PROG RAMMI NG TH E REMOTE The remote can be programmed to control other brands of remote controllable TVs and cable boxes. It is already programmed to operate and satellite receivers. PROGRAMMING most RCA, ProScan, and GE televisions THE REMOTE TO CONTROL ATV If the TV does not turn on when you press the TV button, the remote needs to be programmed. Follow these steps to program the remote to control your particular TV: 1. Turn on the TV. 2.
TV Codes Akai ............................................03 NAD ...........................................07 AOC NEC ............................................06 .................................... 06,12 Candle .......................................06 Panasonic .................... 04,08, I I Citizen .......................................06 Philco ............................ 04,06,12 Colortyme ...............................06 Philips ..................... 03,04,06,12 Pioneer .........
PROGRAMMING CONTROL CABLE THE REMOTE A SATELLITE RECEIVER Cable Box Codes OR ABC .................................. BOX Anvision The remote is programmed satellite satellite TO to control an RCA, GE, or ProScan receiver. If you ever need to reprogram receiver, use code "00". it to operate the If you have a cable box with its own remote, you may be able to use the VCR's remote to operate it. This remote may not operate all models of the brands that are shown. 1. , 3. Turn on the cable box.
FEATURES TO ENHANCE VCR OPERATION • Picture Search • Pro-Tect • Tracking • Time • On-Screen Plus V Options TM Locking V Counter Displays V V V 16 OTH I ER FEATU RES ¥ 39
PICTURE SEARCH OPTIONS The most basic way to search during playback is using the FWD or REV buttons. This section contains several other options available for searching a tape. FORWARD AND REVERSE SEARCH You can search a tape during playback. Sound is turned off during picture search. Search works best for tapes recorded at the SP or SLP speed. 1. Press FWD to search forward or REV to search in reverse. 2.
FRAME ADVANCE Frame advance lets you view one-stop action frame after another during playback. Frame advance works best for tapes recorded at the SP or SLP speed. 1. Press PAUSE on the remote (PLAYoPAUSE on the VCR) to "freeze" the action. 2. Press F.ADV each time you want to view a frame of the scene. 3. Press PAUSE or PLAY on the remote (PLAYoPAUSE on the VCR) to return to normal playback.
ZERO SEARCH The zero search feature enables the VCR to quickly return to a counter reading of 0:00:00 anywhere on the tape. This is especially convenient ZERO when you want to repeat a segment of the CURRENT TAPE COUNTER 2:17:25 tape several times. 1. Go to the beginning 2. Press CLEAR to reset the counter to 0:00:00. 3. Continue playing the tape. 4. Press STOR 5.
TRACKI NG Your VCR has automatic tracking which removes the streaks or snow from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a different VCR. Just use the TRACKING buttons to remove the streaks or snow. You can also use tracking to reduce jittering when you PAUSE a tape of the picture. When you manually adjust the picture, automatic tracking is turned off.
ON-SCREEN The INFO button DISPLAYS STOP CH 05 0:30:00 shows the status of the VCR (STOP, PLAY, RECORD, etc.), channel number, time counter, date, time, and tape speed on the TV screen. The date and time must be set before they can be displayed. 11118197 1. Press INFO to see the on-screen displays. 2. Press INFO again to have only the time counter remain on the screen. 3. TUE 01:30PM On-screen d_p_y _imes ou_ 2 0:30:00 Press INFO again to return to the normal display.
THINGS TO KNOW CONNECTING BEFORE COMPONENTS ¥ Protect • Your Connect Components from all components before Power plugging Surges any power cords into the wall outlet. • Always turn off the TV and other you connect or disconnect Position Cables Interference components before V any cables. Correctly to Avoid Audio Hum or ¥ Insert all cable plugs firmly into their jacks.
CONNECTING YOUR VCR Refer to these pages to help you connect your VCR. JACKS AND CABLES RF Jacks and Coaxial Cables (F-type) The RF jacks provide good picture and mono sound quality, and must be used if audio/video connections are not available for your TV. RFJack These jacks are required for antenna or cable-TV connections. The RF jacks on the VCR are labeled IN FROM ANT. and OUT TO TV.
CHOOSING A VCR CONNECTION There are several different ways to connect your VCR, depending on whether or not you have cable service, and if you have a cable box, and whether some of the channels are scrambled, and maybe you have a satellite box), or a satellite receiver along with cable (but no cable receiver and no cable or...well, you get the picture.
TV WITH RF JACK ONLY This connection assumes: • You are connecting • Your television antenna, cable, or cable box system. has only an RF input jack. This connection provides: • Mono sound playback from VCR. • Record one channel while watching another (except when using a cable box for all channels). To use this connection, you must have: • (1) coaxial cable for cable or antenna connection; (2) for cable box To connect: 1. Connect cables as shown. 2.
TV WITH AUDIO/VI This connection DEO JACKS assumes: • You are connecting • Your television an antenna, cable, or cable box system. has audio/video jacks. This connection provides: • Mono sound playback from VCR. • Record one channel while watching using a cable box for all channels). another (except when To use this connection, you must have: • (1) coaxial cable for cable/antenna box • (2) audio/video connection; (2) for cable cables To connect: 1. Connect cables as shown. 2.
TV WITH AUDIO/VIDEO TO UNSCRAMBLE JACKS AND PAY CHANNELS CABLE BOX ONLY This connection assumes: • You are using a cable box only to unscramble premium channels. • Your TV has audio/video input jacks. This connection • Mono • Recording provides: sound playback a scrambled cable box while from VCR. or unscrambled watching channel an unscrambled through the channel.
TV WITH RF JACK AND This connection SATELLITE RECEIVER assumes: • You have a basic satellite system. • Your TV does not have audio/video input jacks. This connection provides: • Mono sound playback from VCR. • Recording from a satellite receiver. • Recording one off-air or cable channel while watching another. To use this connection, • you must have: (4) coaxial cables, (3) audio/video cables, and (1) Y-adapter To connect: 1. Connect cables as shown. Caution 2.
TV WITH AUDIO/VIDEO JACKS AND SATELLITE RECEIVER This connection assumes: • You have an advanced satellite system. • Your TV has audio/video input jacks. This connection provides: • Stereo sound from satellite receiverand mono playback from VCR. • Recording from receiver while watching cable or off-air channel. • Recording one cable or off-air channel while watching another.
This section about gives you some theVCR, controls including additional a description and display. You also will find aTroubleshootingTips Appendix, simple information of the unit's which might help to resolve section some in this of those problems. Finally, this section contains your warranty information.
FRONT PANEL A U t, \ II \ Remote CHANNEL-TRACKING lower channel when a tape Up or Down in the VCR's channel Sensor Selects next higher or memory. Adjusts tracking is playing. FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback. Starts slow motion during play-pause. PLAY-PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to prevent recording of unwanted scenes. POWER Turns the VCR on or off.
DISPLAY PANEL VCR Power Indicator Power Indicator during a timer Lights when the VCR is turned on. Flashes or express recording. Time, Channel Number, Line Input Indicator (L), Status Displays Time The current time appears. Only an AM indicator appears with the time. There is no indicator for PM. Channel Number or Line Input Indicator The channel number appears when the VCR istuned to a channel. The line indicator (L) appears when the line input is selected.
BACK PANEL AUDIO VIDEO _- _ OUT IN FROM ANT. VHF/UHF OUT TO TV ,.1 3 CH. 4 Switch 3c.4 UlZZ] v Selects the channel the TV to see the VCR picture to which if you connect you will tune the VCR using one of the basic hookups. AUDIO and component, VIDEO IN 1 Jacks Receives like a VCR or camcorder, these jacks. Use INPUT on the remote signals when from another it is connected to to select.
TROUBLESHOOTING TI PS No power • Check to make sure it is plugged into an operating outlet. • Check to make sure your connections VCR does not respond are correct. to remote • Press VCR to set remote • Check • The batteries • Make sure the REMOTE can operate it. • Remove batteries and hold number button the remote. Release number 1 and replace • Remove Remote to make to control sure there are no objects between the VCR and remote. may need changing.
• Check to make sure the TV's fine tuning is correct for the channel you have selected. • Check video cable connections VCR and TV monitor. • Check to make sure the TV monitor • Try another • Some snow/streaks Streaks between is set to video input. tape. in picture are normal during search, stop action, frame advance, and slow-motion during normal playback • Press one of the TRACKING buttons to move streaks up or down for the best picture.
• Check to make sure there was a tape in the VCR and the cassette's safety tab was intact. • VCR ejects cassette when the end of the tape is reached during a timer recording. • Check to make sure VCR Plus+ setup was completed Clock shows incorrect correctly, time or date • Power interruption. Automatic savings settings, • Make sure VCR or cable box is tuned to channel carrying XDS information.
SPECIFICATIONS Format: VHS Record/Playback Video: 4-head System: Audio: Mono record/playback Video Signal System: EIA standard: Antenna: 75-ohm external VHF/UHF combined NTSC color antenna terminal Tuner: USA: 181 channels capability* (125 cable channels) Canada: 178 channels capability* (122 cable channels) Type: AutoProgramming frequency Power Requirement: 120V AC, 60 Hz Power Consumption: 18 watts Dimensions: 3.7 inches high (93 mm) 15 inches wide (380 mm) synthesis 11.
LIMITE What • D WARRANTY your warranty covers: Any defect in material or workmanship. For how long after your purchase: • Ninety days for labor charges. • One year for parts. The warranty period for rental units begins rental firm, whichever comes first. What we will with the first rental or 45 days from Pay any Authorized • Pay any Authorized RCA VCR Servicenter for the new or, at our option, required to repair your VCR.
3 CH.
G P GO BACK button 22 PAUSE button 23, 24, 25, 33, 41, 43 Picture search options PLAY button 23, 24, 40, 41, 48, 49, 51, 52 PLAYePAUSE button Important information 2 40 24, 25, 33, 40, 41, 54 Playing a Tape 24 IN FROM ANT.
S STOP button 23, 24, 25, 28, 32, 41, 42, 43 STOP-EJECT button Safety tab 25 Stopping a timer SAT CABLE button scan 40 Tab, safety 25 40 Table of contents frame advance 41 Tape, playing a 24 reverse 40 slow motion Tape speeds 25 40 Time and date setting zero 42 Time counter SEARCH button 23, 40, 41, 42 Sensor, remote 54 SET DAYLIGHT SAVINGS screen 14 Set time and date manually SET TIME ZONE screen 13 14 Set up cable box 9 43 Time setting set daylight saving set time zone 13 14 TI
settingupchannels15 using 30 worksheetfor channels17 VCRPLUS+ CHANNEL LISTmenu 17, 30 VCRPlus+menu 30 VCR,settingup 7 Viewingchannel 5 VOL buttons 24 W Warranty, limited 61 Z ZERO search feature 42 ZERO SEARCH menu 42 65
If your VCR needs service, please contact your dealer or the nearest Servicenter from the yellow pages. Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. THOMSON CONSUMER ELECTRONICS 10330 North Indianapolis, Meridian Street IN 46290 ©1997 Thomson Consumer Electronics, Trademark(s)® Registered Marca(s) Registrada(s) Printed in Japan TOCOM 15226120 VQTS3339 (A) Inc.
