Manual

CHOOSING A VCR CONNECTION
There are several different ways to connect your VCR, depending
on whether or not you have cable service, and if you have a cable
box, and whether some of the channels are scrambled, and
maybe you have a satellite receiver along with cable (but no cable
box), or a satellite receiver and no cable or...well, you get the
picture.
Five connections are described in this section and one of them
should provide you with a VCR connection that works.
• TVwith RFjack only
• TVwith audio/video jacks
• TV with audio/video jacks and cable box to unscramble pay
channels only
• TV with RFjack and satellite receiver
• TV with audio/video jacks and satellite receiver
If you need to connect additional components not shown in the
diagrams here (and are unsure of how to connect them), refer to
the instruction manual that came with that particular component.
ADVANTAGES OF AUDIO/VI DEO CABLE
CONNECTIONS
Using a simple coaxial cable connection gives you good picture
quality. If your television has audio/video jacks, I highly
recommend using them to get even better picture and sound
quality when recording and playing back videotapes. These
connections give you more convenient operation by not having to
share the TV's antenna signal.
DON'T FORGET ABOUT TH E TV/VCR FEATURE
The TVNCR switch controls whether the picture signal is coming
from the VCR or the TV.
You can change the setting manually by using the TV•VCR button
on the remote or you can set the AUTO TVNCR feature to ON
when using only RFANTENNA connections and OFF when using
the AUDIONIDEO output jacks--so your TV signal is not
interrupted when the VCR is turned on.
47