Manual

TV WITH AUDIO/VIDEO JACKS AND SATELLITE

RECEIVER

This connection assumes:

• You have an advanced satellite system.

• Your TV has audio/video input jacks.

This connection provides:

• Stereo sound from satellite receiverand mono playback from VCR.

• Recording from receiver while watching cable or off-air channel.

• Recording one cable or off-air channel while watching another.

To use this connection, you must have:

• (4) coaxial cables, (5) audio/video cables, (1) Y-adapter, and

(1) splitter

(1) S-VHS cable (optional connection)

To connect:

1. Connect cables as shown.

2. Return to the First Things First, then follow the steps.

USING THIS CONNECTION

• Tune your TV to its video input to record (or watch) the VCR

or satellite receiver.

• To record from the satellite receiver, tune your VCR to its line

input ("L" appears in display).

AUTO TV/VCR Setting:

• Set the AUTO TV/VCR feature to OFE Use of TV•VCR button is

not required.

To play a tape:

1. Insert a tape

2. If necessary, press VCR and then PLAY.

To record one off-air or cable program and watch another

1. Begin recording a program using a recording feature.

2. Select a different channel on the TV.

To record a satellite receiver program and watch a cable or off-

air channel

1. Turn on the satellite receiver, tune the VCR to its line input,

and begin recording a program using a recording feature.

2. Select a different channel on the TV.

CABLE,CABLE 8OX OR_ANTENNA

SATELLITE SIGNAL

SATELLITE RECEIVER

VCR