Manual

BACK PANEL
IN FROM
AUDIO VIDEO ANT.
OUT _- _ VHF/UHF
OUT TO TV
,.1 3c.4 v
UlZZ]
3 CH. 4 Switch Selects the channel to which you will tune
the TV to see the VCR picture if you connect the VCR using
one of the basic hookups.
AUDIO and VIDEO IN 1 Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT on the remote to select.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a IV or VCR, when it isconnected to
these jacks.
IN FROM ANT. Jack Receives a signal from an antenna or
cable system when attached.
OUT TO TV Jack Passessignal to TV using the cable supplied.
56