Manual

Buttons
cf_ VCR1 DSS'CABLE TV
'2 o
CHAN SEARCH
MUTE OH A_'l PREV CH
lob b
bbb
bbb
CLEAR " SPEED
/N
F.ADV q MOVE [_ EDIT
© ';7 ©
-- SLOW + VTRACKING A
<>-<><>-<>
Component Buttons
Press one of the buttons to set the remote to operate that component.
AUX (Auxiliary)
Used with POWER button to turn
on compatible RCA audio
component. See page 21.
DSSoCABLE
Turns on a compatible RCA cable
box or RCA DSS ® satellite receiver.
See page 20.
Used with POWER button to turn
on another brand of cable box, other
than RCA, when the remote is
programmed to control that cable
box. See page 20.
W
Turns on a compatible RCA,
ProScan, or GE TV and sets the
remote to control the TV.
Used with POWER button to turn
on another brand of TV, other than
RCA, when the remote is
programmed to control that TV.
See page 19.
VCR1
Turns on a compatible RCA,
ProScan, or GE VCR and sets
remote to control the VCR.
VCR2°LD
Turns on a compatible RCA,
ProScan, or GE VCR and sets
remote to control VCR when it has
been setup. See page 18.
Used with POWER button to turn
on compatible RCA or ProScan
LaserDisc player.
VCR Function Buttons
Press VCR1 (VCR2,LD) to set remote to control the VCR to use the
function buttons.
Arrow Buttons
(MOVE /_[_] )
Allow you to move through the
menus, enter data and change
settings of selected features.
See page 10.
CHAN Up or Down
Selects next higher or lower channel
in the VCR's channel memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries when
setting the clock or VCR for a VCR
Plus+ or timer recording.
DISPLAY
Shows VCR operating displays on
the TV screen.
FF (Fa_t Forward)
Fast forwards the tape when the
VCR is stopped.
Searches the picture in forward
motion during playback.
INPUT
Turns the line input ori or off.
L1 appears in VCR's display panel
and VIDEO1 appears on TV screen.
Line input refers to the signal
coming from the component
connected to the audio/video input
jacks on the VCR.
MENU'PROG
Displays the VCR MAIN MENU on
the TV screen.
Removes a menu from the screen.
Displays the time counter.
EDIT
Signals two properly connected
compatible VCRs to begin copying
a tape. Seepage40.
F.ADV (Frame Advance)
Lets you view one frame with each
press of the button while the tape is
paused.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1- -
appears on the screen. Then press
the other two numbers.
16