Manual

Buttons
VCR Function Buttons
(continued)
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns off VCR when remote is set
to control the VCR.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use the
number buttons to select another.
Press PREV OH to switch between
the two channels.
REC
Starts VCR recording.
Used for express recording (XPR).
See page 39.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX, TIME, ZERO, and
BLANK SEARCH menus on TV.
Used with
COMMERCIAL,,ADVANCE TM
feature. See page 31.
SLOW - / +
Used for slow-motion playback.
SPEED ('[ape Speed)
Selects a recording speed
(SP, LP, or SLP).
STOP
Stops the normal functions such a_
record, playback, rewind, fast
forward, and pause.
TRACKING Up and Down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Reduces picture "jitter" during
stop-action playback.
TV*VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 15.
TV Function Buttons
Press the "IVbutton to set remote to control a compatible TV. Some buttons may not work with every TV.
Arrow Buttons
(MOVE /NKT[_] )
Allow you to move through the
menus, enter data and change
settings of selected features.
CHAN Up or Down
Selects next higher or lower
channel in the TV's channel
memory when remote is set to
control a TV.
CLEAR
Removes menus or status
displays from the screen.
DISPLAY
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1- -
appears on the screen. Then press
the other two numbers.
POWER
Turns off a compatible TV when
remote is set to control TV.
Used with TV button to turn on a
compatible TV, other than RCA,
when the remote is programmed
to control that TV. See page 19.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
switch between the two channels.
SLOW - / +
Used with the TV's menus to
select and adjust features.
VOL Up and Down
Raises and lowers sound.
Cable Box and RCA DSS ® Receiver Function Buttons
Press the DSS*CABLE button to set remote to control a compatible cable box or satellite receiver. Some buttons
may not work with every cable box or receiver. If you have an RCA DSS ® receiver, test the "TV Function
Buttons" to see which ones operate the receiver.
CHAN Up or Down
Selects next higher or lower
channel.
Numbers (0 through 9)
Select a channel using the number
buttons.
POWER
Turns off a compatible cable box
or satellite receiver.
DSS ® is a registered trademark of DIRECTV, Inc., a unit of Hughes Electronics Corporation.
1"1