Manual

Controlling a VCR

The VCR's remote controls two compatible RCA, ProScan, or GE VCRs with

the VCR1 and VCR2-LD buttons. Most compatible VCRs automatically

respond to VCR1 without being programmed. If you own two compatible

VCRs, test them to see if VCR1 turns on both VCRs. If it does, then you may

want to program this VCR to respond to the VCR2eLD button on the remote.

Program the VCR for Remote Control

Set the Remote Control feature of the VCR

to the VCR1 or VCR2 position. The

remote then controls the VCR with either

the VCR1 or VCR2aLD button --

whichever position you select in the

menu.

1. Press MENU.PROG to display the

VCR MAIN MENU.

2. Press 6 to display PREFERENCES.

3. Press 1 to activate the Remote Control

feature.

4. Press VCR1 or VCR2eLD to change

the setting and program this VCR to

respond to the VCR1 or VCR2-LD

button -- whichever you select.

VCR RAIN RENU

3 Time I

4 ChanneLs

PREFERENCES

2 Auto PLay: ON

3 Auto TV/VCR: ON

4 Panel Display: AUTO

5 CF Marking: ON

6 CF PLayback: AUTO

7 CF Display: BLUE

8 Set Auto Repeat

Press VCR2 to change

Important Reminder: Remember you must

press VCR1 or VCR2aLD on the remote --

whichever you selected in the menu --

before the remote will operate this VCR.

PREFERENCES

2 Auto Play: ON

3 Auto TV/VCR: ON

4 Panel Display: AUTO

5 CF Rarktng: ON

6 CF PLayback: AUTO

7 CF Display: BLUE

8 Set Auto Repeat

0 Exit