Manual

Using the Playback Features
Index Search
The VCR has a "VHS Index Search System" that automatically records an index mark on tile tape
every time you stop and then start a new recording. During playback you can locate the program
you want to play by the number of index marks.
The VCR will automatically locate the index number you select, The VCR will search forward or
reverse from the location you are on the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote to display the INDEX
SEARCH menu on the TV screen.
8. Press two number buttons to enter the number of index
marks you want the VCR to search.
Press CLEAR to correct an entry.
4. Press FF on remote or turn the shuttle ring clockwise
toward FWD on the VCR to search forward.
Press REW on remote or turn the shuttle ring
counterclockwise toward REW on the VCR to search in '
reverse.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR.
• A mark too close to your location on the tape.
• The mark at the beginning of a recorded segment of
five minutes or less.
• The first index mark on the tape when you start at
the beginning of the tape.
INDEX SEARCH
Enter Index number
01
Press FWD or REW
Press SEARCH to exit
0:30:00
Time Search
The VCR will search forward or reverse the amount of time you select from the
location you are on the tape.
1. Insert the prerecorded tape, and press STOP.
2. Press SEARCH on the remote twice to display the
TIME SEARCH menu on the TV screen.
TIME SEARCH
Enter search time
0:30
Press FWD or REW
Press SEARCH to exit
3,
4,
Press number buttons to enter the hour(s) and
minute(s) of the time counter reading you want the
VCR to search.
Press CLEAR to correct an entry.
Press FF on remote or turn the shuttle ring
clockwise toward FWDon the VCR to search
forward.
Press REW on remote or turn the shuttle ring
counterclockwise toward REW on the VCR to
search in reverse.
5. Press STOP to stop time searching.
28