Manual

RCA DSS Satellite Receiver
Position RCA DSS ® receiver.
Position the receiver on top of the VCR. You
may need to position it at different angles
before the VCR can control it. Make sure the
receiver does not cover the transmitting
window on top of the VCR.
Do not stack electronic components or other
objects on top of the RCA DSS ® receiver.
The slots on top of the receiver must be
left uncovered to allow proper airflow
to the unit. Blocking the airflow to the unit
could impair performance or damage your
receiver and other components. Also, do
not stack the RCA DSS_ receiver on top of a
"hot component" such as an audio power
amplifier.
Remote Sensor --
Satellite Receiver
Transmlttlng
Windows
Am
Basic hookup.
Use this hookup if your TV does not have
audio/video jacks.
i.
Set the CH3 CH4 switch on back of
satellite receiver to either channel 3 or 4.
You will tune the VCR to this channel or its line
input (L1) to record from the receiver.
To watch the satellite receiver, turn off the VCR.
If you want to watch or record the signal from
your antenna, cable, or cable box, make sure the
satellite receiver is turned off.
2, Set the CH3 CH4 switch on back of VCR
to either channel 3 or 4.
You will tune the TV to this channel and use the
TVaVCRbutton to watch the VCR.
3,
4,
Connect as shown.
This connection may require additional
accessories not provided.
Plug in power cords of VCR, TV, and
receiver.
5. Jill] i Ill | II [_i (11 _l_*_i;J
Caution: lhe unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
ll ...................,iota....................................................................
From
Cable, Cable Box Satelllte
or Antenna Dlsh
Back of Satellite Receiver A
I i
J
_Tow
t_udioNideo Cables
(supplied)
RF Coaxial Cable
Back of VCR
VIDEO
Back of TV
6