Manual

Startup
Auto Channel Search
The AUTO CHANNEL SEARCH feature memorizes the channel list
available through your signal type--cable or antenna. The signal
type is automatically selected when you auto channel search. Also,
should you change your signal system, you must perform Auto
Channel Search.
Wait until the channel numbers stop changing. This takes about one
to two minutes. The TV tunes to the lowest channel found. Pressing
CHAN N E Lup or down selects only the active channels.
A. Press MENU on the remote to display the VCR MAIN MENU.
B. Press 4 to display the CHANNELS menu.
C. Press 1 to begin AUTO CHANNEL SEARCH.
The VCR automatically selects the CABLE (cable TV) or
ANTENNA signal. For cable connection, 125 channels are
searched; for an antenna connection, 69 channels are searched.
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
4 CHANNELS
CHANNELS
AUTO CHANNEL SEARCH
AUTO CHANNEL SEARCH
NOW SCANNING CHANNEL 1
PRESS ANY KEY TO CANCEL
To change the SIGNAL TYPE:
A. Follow steps A-B above.
B. Press 3 to switch the SIGNAL TYPE between CABLE and
ANTENNA.
6. Add or remove channels from the VCR's memory.
You may want to add or remove channels if some of the channels
are not active, have weak signals, or you do not want to watch them.
We recommend channels be placed in memory using the AUTO
CHANNEL SEARCH feature before adding or removing channels.
A. Press MENU on the remote to display the VCR MAIN MENU.
B. Press 4 to display CHANNELS menu.
C. Press 2 to display ADD/REMOVE CHANNEL screen.
D. Use CHANNEL up and down or the number buttons to go to
channels you want to add or delete.
E. Follow the on-screen directions.
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
4 CHANNELS
CHANNELS
I AUTO CHANNEL SEARCH
2 ADD/REMOVE CHANNELS
ADD/REMOVE CHANNEL
CHANNEL 03
IS PRESENTLY ADDED
PRESS CLEAR TO REMOVE
PRESS MENU TO EXIT
7. Select the language.
The VCR displays the on-screen menus in the English, Spanish, or
French language. The word "Language" cycles through the
different languages when the VCR MAIN MENU is displayed on the
TV screen.
A.
B.
Press MENU on remote to display the VCR MAIN MENU.
Press 6 to display the LANGUAGE, IDIOMA or LANGUE menu.
The arrow indicates which language is selected.
• Press 1 to have the menus displayed in English (Ingles).
• Press 2 to have the menus displayed in Spanish (Espaf_ol).
• Press 3 to have the menus displayed in French (Fran_ais).
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
4 CHANNELS
5 PREFERENCES
6 LANGUAGES
LANGUAGE
SELECT A LANGUAGE.
1÷ENGLISH
2 ESPAQOL
3 FRAN_AIS
PRESS MENU TO CONTINUE
10