Manual

Back Panel
AUDIO1 VIDEO1
OUT IN OUT IN
IN FROMANT.
VHF/UHF
3GH.4 Switch
Selects the channel to which you tune the TV to see
the VCR picture if you connect the VCR using one
of the basic hookups.
IN FROM ANT. (Antenna) Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN and AUDIO1 IN Jacks
Receives signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use INPUT (channel 00) on the remote to
select.
VIDEO1 OUT and AUDIO1 OUT Jacks
Sends signals from VCR to another component like
a TV, VCR, or camcorder when it is connected to
these jacks.
33