Pro 2000® Auto Index Upgrade Kit PRODUCT INSTRUCTIONS
WARNING Before using the RCBS Pro 2000 Auto Index Upgrade Kit, read these instructions carefully to fully learn how to safely operate the related reloading equipment. Failure to properly operate the related reloading equipment can result in severe personal injury and/or equipment damage. If you have any questions while assembling or operating this tool, Call us at 1-800-533-5000 or 1-530-533-5191 Monday – Thursday 6:30 am – 3:00 pm Pacific Time (hours may vary) Or email us at rcbs.tech@atk.
PRIMERS AND POWDER • Store primers and powder beyond the reach of children and away from heat, dampness, open flames and electrical equipment. Avoid areas where static electricity is evident. • Do not use primers of unknown identity. • Dispose of unknown primers in accordance with applicable regulations. • Keep primers in the original factory container until ready to use. Return unused primers to the same factory packaging for safety and to preserve their identity.
PRO2000 AUTO INDEX UPGRADE KIT INSTALLATION 1. Safely remove and store all reloading components from your Pro2000 Progressive Press. Remove the Die Plate to allow for more room when converting the press. 2. If you used the four ¼” mounting holes to secure your Pro2000 to your loading bench, you will have to remove the front left bolt. This hole is used to locate the base of the auto Index Cam bracket. The auto Index Cam bracket is secured to the press by using the left mounting slot in the casting.
12. Re-install the detent spring and ball into shell plate holder. See photo 8. 15. Install Large or Small Primer Plug Assembly, depending on need, into the bottom of the Shell Plate Holder. 16. Tighten the Primer Plug assembly with a 7/16” openend wrench (not included). See photo 2. Photo 8 13. Remove the Star Wheel from your Shell Plate. Install the Shell Plate onto the Auto Index Shell Plate Holder assembly with the shoulder bolt and 5/16” hex wrench.
PRESS OPERATION We recommend that several cases be completely reloaded one at a time before proceeding with full operation. This will help you to become familiar with the loading process. NOTE: Place bullets in bullet tray and empty cases in the ammo bin on the left front of the bullet tray. Loaded rounds will fall into the ammo bin on the right front of bullet tray. See photo A. Photo C Step 2: Place a case into Station 1, and lower the handle. The case will be sized and the spent primer will be ejected.
PRO 2000 with AUTO INDEXING - OPERATING PROCEDURE Now that you have read the instructions and are familiar with your upgraded Pro 2000 with Auto Indexing, you are ready to reload! Based on our experience, we will explain the most efficient way to use your upgraded Pro 2000 with Auto Indexing. You may choose to change your technique as you become more accustomed to the function of this tool, but for now, we strongly suggest you use the following operating procedure.
-8-
PRECISIONEERED RELOADING EQUIPMENT We think that we make the very best reloading equipment in the world. If you agree, please tell your friends. If you disagree, tell us we want to do something about it! Customer Service 1-800-533-5000 (US or Canada) or 530-533-5191 Hours: Monday - Thursday, 6:30am - 3:00pm Pacific Time (hours may vary) e-mail: rcbs.tech@atk.com or visit our website at www.rcbs.com RCBS 605 Oro Dam Blvd.