ROCK CHUCKER SUPREME PRESS P R O D U C T I N S T R U C T I O N S
SAFETY Reloading is an enjoyable and rewarding hobby that can be conducted safely. But carelessness or negligence can make reloading hazardous. This product has been designed from the beginning with the user’s safety in mind. When reloading, some safety rules must be followed. By observing these rules, the chance of a hazardous occurrence causing personal injury or property damage is minimized. GENERAL • Use all equipment as the manufacturer recommends.
By combining the famous RCBS block “O” frame with the compound leverage system, the Rock Chucker Supreme will develop work pressure that would spring other presses out of alignment. To insure alignment under these pressures, the Rock Chucker press frame provides a full four inches of ram-bearing surface to rigidly support the one inch diameter main ram. The compound leverage action is similar to that of a power punch press.
INSTALLATION Mount the Rock Chucker Supreme Press to a sturdy workbench or table with two 3/8” bolts of sufficient length to penetrate the press base and bench. Attach the handle nut to handle. Install the threaded portion of the handle to either the right or left side of the toggle block and lock down with the handle nut. See photo #1. The handle nut must remain tight at all times to avoid damage to the handle and toggle. Install the Primer Arm as show in photo #2.
Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6
ROCK CHUCKER SUPREME PRESS PARTS LIST Key Part# 1 2 3 4 5 6 7 8 9 10 11 12 709193 788902 709127 709128 709196 709197 187212 709194 109112 788255 187219 709198 Description Frame Linkage Arm (2) Link Pin, Left Link Pin, Right Toggle Block Toggle Block Pin 7/16-20 Nyloc Nut (2) Ram Ram Clip Spring Ram Pin 1/4-28 x 3/8" Setscrew Handle Key Part# 13 14 15 16 17 18 19 20 20 21 21 22 109121 109136 709138 709195 109145 109146 788212 709506 709507 709554 709555 109508 Description Handle Ball 5/8-18 Hex Jam Nut
REFERENCE TABLE Caliber Shell Holder Number 17 Remington 218 Bee 22 Hornet 22 K-Hornet 22 Remington Jet 22 Savage High-Power 22-250 (22 Varminter) 220 Swift 221 Remington Fireball 222 Remington 222 Remington Magnum 223 Remington (5.56mm) 5.
SHELL HOLDER CHART Note: RCBS Shell Holder numbers do not correspond to those of other manufacturers. 09201 Number 1: 218 Bee 25-20 Winchester 32-20 Winchester 09202 Number 2: 22 Savage High Power 25-35 Winchester 6.5mm x 55 Swedish Mauser 7-30 Waters 30-30 Winchester 307 Winchester 7.5mmx54 French MAS 7.
