THE GRAND CONVERSION UNIT PROGRESSIVE RELOADING PRESS P R O D U C T I N S T R U C T I O N S
IMPORTANT Before using the RCBS Shot Shell Press, read these instructions carefully to fully learn how to safely operate the related reloading equipment. Failure to properly operate certain reloading equipment can result in severe personal injury and/or equipment damage. If you have any questions while assembling or operating this tool, call us at 1-800-533-5000 or 1-530-533-5191 Monday - Friday 6:30 a.m. to 4:30 p.m. Pacific Time The instruction manual contains specific safety and operating information.
UNPACKING THE GRAND CONVERSION UNIT BAG 1 PARTS - 12 GAUGE Bag 1, Parts List A. Hex Wrench 5/16 B. Hex Wrench 7/32 C. Hex Wrench 3/32 Bag 2, Parts List – 12 Gauge D. Powder Bushing E. Shot Bushing 1 1/8 oz #7-1/4 F. Wad Guide G. Crimp Starter, 6 pt., 12 Gauge Bag 2, Parts List – 20 Gauge H. Powder Bushing I. Shot Bushing 7/8 oz #7 ? J. Wad Guide K. Crimp Starter, 6 pt.
GRAND CONVERSION 12 AND 20 GAUGE Congratulations on your purchase of the RCBS Grand conversion unit! 10. Lift off tool head and set aside. 11. Remove case eject assembly with 5/16 hex wrench provided. (See photo 3) CONVERSION INSTRUCTIONS: 1. Please refer to your THE GRAND product instruction manual. 2. Empty POWDER and SHOT hoppers. Section titled DRAIN SHOT AND POWDER HOPPERS. 3. Empty remaining powder and shot in the charge bar.
16. Insure that the three column supports are secured tightly. 17. Install proper toolhead and reinstall the three column screws. 18. Position and tighten case eject assembly in accordance with section titled COMPONENT ADJUSTMENT SECTION, case eject adjustment. 19. Reattach lower push rod to upper push rod. (Note: The lower push rod will “bottom” out into the upper push rod. The 1/4-28 nut should be at the bottom of the threads on lower push rod during re-assembly.) (See photo 6) 6 20.
THE GRAND PARTS LIST • JUNE 2002 # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 48 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 Description Part No.
# 98 99 100 101 102 Description Part No. 10-32 X 5/8 Socket Head Cap Screw SS Primer Feed Bar SS Spring SS Primer Shut Off Pin SS Primer Tray Lid 186624 189034 189061 789039 189035 Qty. # 129 130 130 2 1 1 1 1 SS Size Die Bushing SS Spring SS Hull Extractor 12 GA. SS Hull Extractor 20 GA. SS Decap Rod Assembly SS Size Die Body SS 1-3/8-12 Lock Ring SS Size Ring 12 GA. SS Size Ring 20 GA.
Parts Diagram Here 7
89100 THE GRAND, Charge Bar POWDER CHARGE WEIGHT IN GRAINS GRAINS 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Accurate Arms Nitro 100 DuPont 700-X DuPont PB DuPont SR 7625 DuPont-800-X DuPont SR4756 DuPont MR4227 American Select Alliant Red Dot Alliant Green Dot Alliant Unique Alliant Herco Alliant Blue Dot Hodgdon Clays Hodgdon International Hodgdon Universal Hodgdon HS-6 Hodgdon HS-7 Scot 1000 Solo 1250 Winchester 540 Winchester 571 Winchester Super Target W
PRECISIONEERED ® RELOADING EQUIPMENT We think that we make the very best reloading equipment in the world. If you agree, please tell your friends. If you disagree, tell us - we want to do something about it! Customer Service 1-800-533-5000 (US or Canada) or 530-533-5191 Hours: Monday - Friday, 6:30am - 4:00pm Pacific Time e-mail: rcbstech@seg-outdoor.com • www.rcbs.com RCBS • 605 Oro Dam Blvd.