User manual

17
ENGLISH
It is possible to load a pre-saved SHOW from the dedicated menu. A SHOW preset includes
all the mixer parameters except the INPUT and MAIN level. These parameters are absolute
values and can be controlled via pot knobs only. The possible selection is between 10
presets (01 to 10) plus a special preset n°11 called RESET MIXER. Loading the RESET
MIXER preset brings the mixer to a default setting.
To load a preset rotate the EDIT encoder clockwise, select the chosen preset and confirm
the selection pressing the EDIT encoder. A message will appear:
LOAD PRESET “XX” – PRESS ENCODER TO CONFIRM - PRESS ANY KEY TO CANCEL
Press the EDIT encoder again to load the selected preset, or press any key to cancel the
operation.
When a preset is loaded, this information will appear in a dedicated area on the LOAD
SHOW page.
SAVE SHOW page:
The SAVE SHOW page permits to save all the parameters of the mixer in a preset. Again,
the INPUT and MAIN level are excluded from the preset data, they are absolute values and
can be controlled via pot knobs only.
Select a preset location from the dedicated menu rotating the EDIT encoder, then press the
EDIT encoder; a display message will appear: