User manual

18
ENGLISH
SAVE PRESET “XX” – PRESS ENCODER TO CONFIRM - PRESS ANY KEY TO CANCEL
By pressing the EDIT encoder, the preset will be stored. If the selected preset is already in
use a message will appear:
OVERWRITE PRESET “XX” – PRESS ENCODER TO CONFIRM - PRESS ANY KEY TO
CANCEL
By pressing the encoder again will store the preset, while pressing any key will cancel the
operation.
By pressing the SYSTEM button once more, the SET page is shown:
The SET page allows to access to some important mixer settings.
The boxes from top left to bottom:
+48V ON/OFF: enables or disables +48 V phantom power on MIC inputs 1 and 2.
BLUETOOTH ON/OFF: enables or disables the Bluetooth connection both for audio
streaming and control.
STARTUP DEFAULT ON/OFF: if this box is set to OFF when the system is switched on, the
mixer keeps its last status when turned off. If the box is set to ON, the mixer is switched
on with a default configuration.
The BACKLIGHT and CONTRAST boxes permit to set brightness and contrast of the LCD
display.
Pressing the SYSTEM button again gives access to the FSW page dedicated to assign
footswitch functions (see section 6 in the input panel description).
FSW page:
The FSW page is composed of three menus: TIP FUN, RING FUN, POLARITY
1. TIP FUN (Tip jack contact function) including:
- MUTE OUTS
- FX ON/OFF
- MFX CHAN A/B
- MFX ON/OFF
- MFX AMP ON/OFF
- MFX MOD ON/OFF
- MFX DLY ON/OFF
- SHOW NEXT
- SHOW PREV
- MASTER PROC ON/OFF