User manual

19
ENGLISH
2. The RING FUN (Ring function) provides the same selections as for TIP FUN menu.
3. A POLARITY menu allows to change the initial status of the connected footswitch
between NORMALLY CLOSED and NORMALLY OPEN.
17
MFX button:
The MFX button controls the menu related to the MFX chain present on LINE input 4.
Two local settings of the whole MFX are available, called Channel A and B. It is possible
to switch between A and B using the footswitch (see dedicated function).
The SET page allows to select between FX channel A or B with the dedicated knob icon.
MFX ON/OFF box allows to turn on and off the MFX chain. The AMP, MOD, DLY ON/
OFF boxes located in the bottom line of the display turn on and off individually the
components of the MFX chain:
AMP (Guitar & Bass amp simulator), MOD (modulations effects), DLY (delay).
Pressing the MFX button again gives access to the AMP page:
AMP page: using the AMP MODEL menu on the bottom of the display, it is possible to
select one of the 15 amp simulations by OVERLOUD
TM
:
1. DARKFACE ‘65
2. JAZZ C
3. ROCK’64
4. ROCK 800
5. ROCK 900
6. TOP 30
7. MODERN
8. BASSAMP
9. BASSMATE
10. MARKBASS 1
11. MARKBASS 2
12. SLO 88 CRUNCH
13. SLO 88 LEAD
14. OVERANGE 120
15. HEAVY 51
Rotate the EDIT encoder to select an AMP Simulation model.
The top line of rotary controls allows to change the parameters of the selected AMP
model: DRV (Drive), BASS (Bass frequencies), MID (Mid frequencies), TRB (Treble-High
frequencies).
The AMP ON/OFF box allows to bypass the amp simulator.
Press MFX again to access to MOD page:
MOD page: use the MOD. PRESET menu on the bottom of the page to select a
modulation program between:
1. CHORUS