Quick start guide

ManualsBrandsRCF ManualsDigital MixersDigital Wireless MixerDesigned for the ambitious musician and small bands, the M18 is the first digital mixer to have various realistic amp simulations for guitar and bass on board

ITALIANO

DEUTSCH

ESPANOL

ENGLISH

FRANÇAIS

You can modify these settings from the MixRemote app in the SETTINGS > NETWORK page.

11. USB Type A port

Insert here a USB stick to play high quality audio ﬁles. .WAV, .AIFF and MP3 ﬁle allowed for reproduction.

12. MIDI connectors

Connect here your MIDI controller. See the dedicated page on MixRemote (SETTINGS > MIDI) to view the available

function assignable to MIDI ports.

13. Headphones stereo output

Connect your headphones here either for PFL, Personal Monitoring or the Main Mix listening.

14. LINE Input 11-18

Connect here your line level sources like keyboard, external audio device or other small analog consoles used for submix.

Input level can be set to +4dBu or -10dBV.

15. LINE Input 9-10 with switchable HiZ input.

Connect to these inputs your line-level sources, at +4 dBu or -10 dBV, or high-impedance passive instruments, like electric

guitars, electric basses or piezo pickups.

WiFi AP

Frequency | 2,4 GHz

Channel | 3

Nation | Not assigned

Password | No password

Security | DIsabled

SSID | M 18-xxxxxx

Ext. Antenna | enabled

LAN PORT

DHCP Client | no

IP Address | 192.168.0.18

Gateway | 0.0.0.0

Mask | 255.255.255.0

DNS Server | 0.0.0.0

4. External Wi-Fi Antenna connector

M 18 includes an internal antenna and provisions for an external antenna. Attach the provided external antenna to this

connector for optimal performance of the MixRemote app.

5. Power switch

Turn On and Off your M 18 device.

6. Power cable inlet.

Connect here the provided power cord.

7. AUX Output 1-6 Balanced jacks

Connect to these +21dBu balanced output your stage monitors or external effects.

8. LAN connector

It is possible to connect here an external Wi-Fi Access Point for advanced communication conﬁgurations. This port is

intended also for future applications.

9. Dual footswitch connector

Connect here a single or dual footswitch. Assigned switching functions are completely programmable.

10. Internal access point reset pushbutton

Press this button during normal operation to restore the default settings for both the internal Wi-Fi Access Point and the

LAN port, as follows: