User Manual

RCF spa
M 18 Digital Mixer User’s Manual
16
Inputs 5
-
6
and 7
-
8
The left part of the center column
contains on the top left a key (1) to
return to INPUTS followed by the
level of the individual fader in dB
(2), the Mute (3) key, the name of
the channel (4), the fader (5), the
PFL (6) key and the non-editable
number of the hardware input (7).
The larger part of this page shows a
rack containing RCF PRE, RCF GATE
and RCF COMPRESSOR, above the
latter two there is a box to recall
presets.
Inputs 5
-
6 and 7
-
8 left column is a little
bit different, since these channels may
have MultiFX (MFX) additional
section. MFX assignment is made in
SETTINGS tab GLOBAL page.
The MultiFX section allows you to use
up to three chained effects selectable
between MOD (Chorus, Flanger or
Tremolo), FX (Pitch Shifter), and DEL
(Mono Delay, Vintage Delay, ER
Delay).
Pressing the Order selector appears a
drop-down menu allowing you to
choose the order of effects which
better suits your needs for each song,
as you can see in above pictures.
At the top of each pedal there's a display showing the last modified control value. At the bottom there's the
activation switch; its status is displayed by a light which is lit when the unit is on.
IN DEPTH
These channels let you use up to three cascaded effects types: MOD (Chorus, Flanger or Tremolo), FX
(Pitch Shifter), and DEL (Mono, Vintage or ER Delay).
You can change the order of cascaded effects through the selector Order, and view the result on the top
right indicators. These same indicators allow you to select which pair of effect to be shown for editing. The
order from left to right of the FX, MOD and DEL buttons reflect the actual audio cascading.
If you touch any of the effect button, the editing view
for effects will shift to include the effect you have selected.