User Manual

RCF spa
M 18 Digital Mixer User’s Manual
18
By tapping the AMP stomp box, a new page
shows up, with all the relevant parameters
on a single view for maximum editing
efficiency.
Each Head AMP simulation has a preferred
Cabinet combination, and every time you
select a Head AMP, the matching Cabinet
will show up. Then, you can vary the
Cabinet model and experiment with
unusual combinations.
Each Head AMP has up to 6 parameters
that accurately model the controls
available on the original amplifiers.
The ON/OFF rocker switch represents the
BYPASS switch, and has same function as
the switch on the stomp box view.
As visible on the left, most Cabinets have
similar names to the Head AMPs.
The last four Head AMPs and Cabinets are
dedicated to bass
guitar, covering a wide range of resulting timbre.
In addition to the Overloud
TM
models, two well-known
MarkBass
TM
models have been included.
You can also selet the microphone type which has been used
when modeling the AMP (see below):
RadioElectro 16 (large-diaphragm cardioid dynamic)
American 57 (small-diaphragm cardioid dynamic)
GermanFet 87 (large-diaphragm cardioid condenser)
The choice for microphone position is
between:
Near, on-axis
Near, off-axis
Far (1 metre from cabinet)