User Manual

RCF spa
M 18 Digital Mixer User’s Manual
22
EFFECTS view
The EFFECTS tab contains two pages: SEND and MULTIFX.
The left column shows the SEND and the MULTIFX select buttons; the right column shows usual the MAIN
OUT controls.
EFFECTS > SEND
The SEND page shows the three rack mount effects units: FX1 for reverbs, FX2 for delays, and FX3 which can
be assigned to one of four different types of delays and modulations effects. On the upper left side over each
rack device there are small Preset boxes, to recall several factory presets. On the right left side over each unit
there is a box to choose the effect variation. Only on the third device, there is an additional central box to
choose the effect type among Delay, Chorus-Flanger, Tremolo and Pitch Shifter.
The large display shows parameter values and on the right there is the activation button for each effect.
IN DEPTH
The Digital Reverb lets you choose between two large hall, two medium hall, two medium rooms, two small rooms,
two plates and two ambiences.
You can create your own configurations by modifying the following parameters:
- Predelay (delay before reverb)
- ER (amount of primary reflections)
- Decay (time decay)
- Spaceness (percentage of spatialization)
- Damping (percentage of absorption of the higher frequencies)