User Manual

RCF spa
M 18 Digital Mixer User’s Manual
23
The Digital Delay can be the chosen among Stereo, Vintage, Modern, Dual and ER.
You can create your own settings for Stereo and ER by changing the following parameters:
- Time (length of the delay)
- Feedback (% of delay feedback)
- Lo Cut (low cut filter frequency)
- Hi Cut (high cut filter frequency)
- Width (amplitude)
Vintage delay parameters:
- Offset (offset time compared with main Time) instead of Feedback
- Filter (da 0,00 a 100) is a Band-pass filter
Modern delay parameters:
- Offset (offset time related to Main Time) instead of Feedback
- LoCut (low cut filter frequency) instead of Hi Cut.
Dual delay parameters:
- Factor (1/2, 1/3, 1/4, 1/6, 1/8 and 1/16) instead of Feedback
- Feedback 2 (% of delay 2 feedback) instead of Hi Cut
Chorus-Flanger parameters:
- Rate (frequency swing)
- Width (amplitude)
- Depth (depth swing)
- Feedback (% effect feedback)
- Blend (% mix between dry signal and processed)
Tremolo parameters:
- Rate (frequency rate)
- Depth (depth swing)
Pitch Shift parameters:
- Pitch 1 ( voice 1 note interval; from -12 to +12, in semitones , equivalent to +/- 1 octave)
- Pitch 2 ( voice 1 note interval; from -12 to +12, in semitones , equivalent to +/- 1 octave)
- Cent1 (detune of voice 1, in cents)
- Cent2 (detune of voice 1, in cents)
- Mix (% mix between voice 1 and voice 2)
EFFECTS > MULTIFX
This page shows the four channels that have
multiple effects. Here you can also configure
which pair of channels - Channels 05-06 or
Channels 07-08, which are active in this example
– will have the MFX option active. Only channels
09 and 10 provide you five effects. Pressing any
of these buttons or the blue button, you access
immediately the corresponding channel.
For details about MFX options, please see
Inputs 05-08 and Inputs 09-10 chapters.