User Manual

RCF spa
M 18 Digital Mixer User’s Manual
28
LOAD/SAVE view
This section features two pages: SNAPSHOT and SHOW
Using these pages you can save up to 200 SNAPSHOT presets or 100 SHOW presets that you can recall later by
pressing the load button after the selection of the desired snapshot/show number.
SNAPSHOT
The snapshot presets include all the settings but outputs. They are intended for storing all the parameters that you
would typically fine tune in advance for a specific song or context; with them , you avoid affecting output settings
(level, equalization, monitor busses) so that a Snapshot change does not modify the settings that are usually found
during the sound check within the venue for the live act.
A Snapshot Load action does not mute the audio outputs, but applies parameter changes smoothly to minimize audio
artifacts.
Please note that in
SETTINGS
>
SYSTEM
page you can select whether to include
MFX patches recalls independently for each
MFX.
When saving a Snapshot, you have a
further option: you can enable the save of
Mix Bus parameters (see at page 10). This is
useful when the M18 Digital Mixer is being
used as a submixer, in which case the
channel levels are part of the overall sound
creation process.
To load a Snapshot, first select the
Snapshot number on the left pane, and the
press Load.
SHOW
The Show includes all parameters
pertaining to inputs and outputs, except
the global configuration parameters (see at
page 10). A Show Load action mutes all
outputs, to avoid sudden level changes.
To load a Show, first select the Show
number on the left pane, and the press
Load.
To save a Show, first select the Show
number on the left pane, and the press
Save; you have the option to edit the Show
name before confirming the Save
operation.