User Manual

RCF spa
M 18 Digital Mixer User’s Manual
30
GLOBAL
This page contains several settings affecting the operating mode of the mixer.
The 48V Phantom Enable section allows the activation of 48V phantom power for microphone inputs in groups of 4,
using Phantom 1-4 and Phantom 5-8 switches.
The Phones Mode section sets the mode of the headphone output, allowing the selection between PFL (on FADERS
INPUT page) and Personal Mix.
The Input Stereo Links section allows you to link in stereo an odd channel with the next even channel. After the link, all
settings from the odd channel will be copied to the even channel, and in the bottom row the numbers of paired inputs
will show up (e. g. 03-04) below a single fader with stereo VU meter. The Link option is available for all inputs (1 to 18)
plus the stereo player from USB flash drive. By default the player is linked in stereo.
The Footswitch section controls allows you to determine the footswitch operation; Mode allows you to choose between
LATCHING or MOMENTARY N.C. footswitch contact. Then there are SW1 assign (TIP) and SW2 assign (RING) drop-
down menus listing all the parameters to be controlled.
The Output Routing section has drop-down menus to choose the source for several physical output:
- AUX output between its relevant AUX, MAIN or PHONES busses
- PHONES output between MAIN and PHONES busses