User Manual

RCF spa
M 18 Digital Mixer User’s Manual
32
SYSTEM
This page contains system settings affecting the M 18 Digital Mixer operations.
The Snapshot saves switches allow to save also the MFX patch numbers, independently for each MFX. In this way, you
can associate saved patches of each MFX to the current Snapshot.
The ONLINE and OFFLINE buttons allow a change of connection status. Immediately below, there's a text line
indicating the status of the mixer (Mixer disconnected or Mixer connected).
There is the option “Go OFF-Line if the mixer is disconnected for:” followed by its time line to choose how many
minutes, in a range from 1 minute to 30 minutes. We suggest to keep it to the maximum value.
WARNING: if disconnection is frequent, please check the WLAN connection in SETTINGS tab NETWORK page.
On the right side, we have the Application Version and the Firmware Version.
These information are followed by At startup behavior setting: you can select between Init Mixer (the mixer powers up
in initialized state, with all faders turned down) and Last show (at power-up, the mixer loads the last show that was
either loaded or saved).
In case of communication issues between the tablet and the mixer itself, you can press
Updt All Data, which recalls the last active status of the mixer, including all the changes done.
Documentation Mode contains information for our team... nothing useful for the use of the unit ☺
Random VU Meters activates the VU Meters when the mixer is disconnected, and is used for demo purpose only!