User Manual

RCF spa
M 18 Digital Mixer User’s Manual
34
Con
nect your active speaker or your amplifier to these +21dBu balanced Output. The green LEDs
show the signal presence on MAIN MIX channels independently for LEFT and RIGHT outputs.
4. External Wi-Fi Antenna connector
M 18 includes an internal antenna and provisions for an external antenna. Attach the provided
external antenna to this connector for optimal performance of the MixRemote app.
5. Power switch
Turn On and Off your M 18 device.
6. Power cable inlet.
Connect here the provided power cord.
7. AUX Output 1-6 Balanced jacks
Connect to these +21dBu balanced output your stage monitors or external effects.
8. LAN connector
It is possible to connect here an external Wi-Fi Access Point for advanced communication
configurations. This port is intended also for future applications.
9. Dual footswitch connector
Connect here a single or dual external footswitch. The footswitch port allows connection of a single or
double stage footswitch to recall effects’ presets or to mute effects’ returns, as well as providing several
other control functions.
10. Internal access point reset pushbutton
Press this button during normal operation (for less than 10 seconds) to restore the default settings
for both the internal Wi-Fi Access Point and the LAN port, as follows:
LAN
IP configuration
Static
IP address
192.168.0.18
Netmask
255.255.255.0
Gateway
0.0.0.0
DNS
0.0.0.0
WiFi
Band
2.4 GHz
Country
NONE
Channel
3
Security
OPEN
SSID
M18
-
xxxxxx
External Antenna
Enabled
This button is available also for other functions, you can review them more in detail at page 36.
You can modify these settings from the MixRemote app in the SETTINGS > NETWORK page.
11. USB Type A port
Insert here a USB stick to play high quality audio files. .WAV, .AIFF and MP3 file allowed for
reproduction.
12. MIDI connectors
Connect here your MIDI controller. See the dedicated page on MixRemote (SETTINGS > MIDI) to
view the assigned MIDI channels for specific functions.