User's Manual

12
ENGLISH
IMPORTANT NOTES
- The acoustic axis of every studio monitor shall be aimed to the listener ears.
- It is strongly advisable to keep them in the vertical position in order to get the best
results.
- The stereo reproduction is got through a symmetrical configuration of loudspeakers: the
left and the right studio monitors shall be placed at an equal distance from the listener
(in order to get an ideal triangle, where the 2 loudspeakers and the listener are the its
vertexes).
- Do NOT put objects close to studio monitors that may cause undesired reflections and /
or slightly change the frequency response.
STUDIO MONITORS ON FLOOR STANDS
This is the optimal solution: the 2 studio monitors are on 2 identical floor stands placed
just behind the mixer. The floor stand height needs to be suitable for this purpose: each
loudspeaker axis is to be at the same level of the listener ears. Set (or leave) both BASS TILT
and BASS ROLL-OFF controls to OFF (but particular studio monitor placements, explained
in the next manual section).
STUDIO MONITORS ON THE MIXER
If the floor stands are not available, a solution is to place the studio monitors directly on the
mixer (if there is enough room). As the mixer is in fact a desk just under the loudspeakers,
the early sound reflections can affect the frequency response. A smart correction against
this little problem is given by the DESKTOP CONTROL, so on both ‘Mytho’ studio monitors,
set the ‘L’ dip-switch (on the rear panel) to ON.
SPEAKER
PLACEMENTS
IMPORTANT NOTES
STUDIO MONITORS ON
FLOOR STANDS
STUDIO MONITORS ON THE
MIXER
STUDIO
MONITOR
MIXER
STUDIO
MONITOR
MIXER