Manual

13
ENGLISH
working, loudspeaker lines should not be laid together with other electric
cables (mains), microphone or line level signal cables connected to
amplifier inputs.
14. The loudspeaker cable shall have wires with a suitable section (twisted, if
possible, to reduce inductive effects due to surrounding electro-magnetic
fields) and a sufficient electrical insulation.
OPERATING PRECAUTIONS
• Install this loudspeaker far from any heat source.
• Never force the control elements (keys, knobs, etc. ).
• Do not use solvents, alcohol, benzene or other volatile substances for
cleaning the external parts of this product.
• If the speaker is used in particulary cold places, drive it with a low signal
for 5-10 minutes before using it at maximum power.
RCF S.p.A. would like to thank you for having purchased this
product, which has been designed to guarantee reliability and
high performance.
PL40, PL6X and PL8X are ceiling speakers featuring elegant and innovative
design that can be flush-mounted in false ceilings or panels.
PL6X incorporate a 160 mm (6”) and PL8X a 200 mm (8”) loudspeaker. Both
have a coaxial 25 mm (1”) tweeter placed on a bridge support.
PL40 incorporate an 86 mm-3.5” a full range speaker. The speakers are
equipped with a line transformer that enables direct connection to constant
voltage systems at 70 V or 100 V. The multiple sockets on the transformer
make it possible to select the output power from among several values.
Installation is quick and easy thanks to a special three-hook system that
avoids the need for using screws and pallet or other attachment elements.