Manual

ENGLISH

IN OUTDOOR USE, AVOID INSTALLING THE SPEAKER IN PLACES EXPOSED

TO HARSH WEATHER CONDITIONS.The speaker is designed for ﬂush-mount

installation in false ceilings. Before installing the speaker, make sure that there

is sufﬁcient space behind the false ceiling panel to hold the speaker: with

respect to the support surface of the front ﬂange of the speaker, a free space

of 90 mm (3.46”) for PL8X and 75 mm (2.87”) for PL6X depth is necessary

110 mm (4.33”) for the PL40 speaker.

1. Drill a hole of diameter Ø 224 mm (8.82”) for PL8X and 182 mm (1.17”)

for PL6X and 122 mm for PL40 in the false ceiling at the point chosen for

installing the speaker.

2. Insert the speaker in the hole as shown in Fig. 1 - point 1.

3. Screw in the three screws that tighten the three attachment terminals

of the speaker, as shownin Fig. 1 - point 2 until the external ﬂange touch

the ceiling.

4. Fit the metal protective mesh onto the front of the speaker as shown in

Fig. 1 - point 3. Use the adhesive felt, if available, to guarantee the grill

clamping.

Fig. 1