manual

INSTALLATION INSTRUCTIONS

Island Installation

1) Provide a 10 1/8" H x 34 1/2" W x 21" D cutout to the front of the island.

2) Provide support beams using metal studs.

3) Pull the drawer out of the drawer casing to gain access to the mounting holder at the front of the

casing.

4) Insert the drawer casing into the island opening.

5) Secure the drawer casing with screws at the inside front top and bottom, using the pre-punched

mounting holes.

6) Re-assemble the drawer section into the drawer casing.

7) Apply weather-proof sealant along the edges of the warmer. (Not Included)

8) Plug-in the warmer to a properly grounded, weather-proof, electrical outlet.

IMPORTANT

- Be sure that the warming drawer is properly grounded and installed by a qualified technician. The

electrical cord has a 3 prong plug. Do not cut any of the prongs.

- Make sure that the island is free of cracks that would allow water or other liquids to get into the

electrical controls.

- Keep the warming drawer away from water sprinklers.