User's Manual

channel(s).
3. Make sure camera is within range of receiver.
Blank monitor
1. Make sure receiver is switched ON.
2. If using AC adapter, make sure it is plugged in.
Interference on
camera picture
1. Make sure each camera (transmitter) is within range,
and that no large obstructions are blocking the signal.
2. Try repositioning the camera, receiver or both to
improve the reception quality.
3. If a camera is positioned close to the receiver, point
antenna away from the receiver.
4. Reposition other nearby equipment transmitting on
900MHz frequency
Audio problems
1. Ensure the volume is turned up sufficiently on the TV.
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound (feeds back), try
moving the camera away from the receiver or angle the
receiver differently.
Camera
SPECIFICATIONS
TV System PAL or NTSC
Resolution 360 horizontal TV Lines
Signal/Noise Ratio 48dB
High-Speed Electronic Shutter 1/60 - 1/15,000 sec
Image Sensor 1/3” CMOS
Min. Illumination 0.5 lux
Current Consumption 160mA
Overall Size 3.25”Lx1.2”Diameter (antenna not included)
Frequency Range 900-930MHz
Modulation FM
Video Signal/Noise Ratio 48dB
5
910, 920MHz