User's Manual

Drilling

Template for Wall Mounting Camera(s)///

For wall

-mounting Camera (s), drill three holes using a 1/4” drill bit and the

template

below. Insert supplied wall anchors into holes and secure Camera to

wall with supplied

screws.

INDOOR/OUTDOOR

900MHz

WIRELESS CAMERA SYSTEM

INCLUDES: VIDEO/AUDIO CAMERA TRANSMITTER & MONITOR/RECEIVER

CR3020 USER’S GUIDE

PAGE 1
Drilling Template for Wall Mounting Camera(s)/// For wall-mounting Camera (s), drill three holes using a 1/4” drill bit and the template below. Insert supplied wall anchors into holes and secure Camera to wall with supplied screws.
PAGE 2
Congratulations on your purchase of the 900MHz Wireless Color Camera system. The system consists of a wireless A/V receiver and a wireless Camera, an ideal product for application of covert monitoring, such as the porch, watching the yard, pool, pets or the baby. It is also suited to small business surveillance application. .
PAGE 3
Interference on camera picture Audio problems 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, receiver or both to improve the reception quality. 3. If a camera is positioned close to the receiver, point antenna away from the receiver.
PAGE 4
1. Connect one end of the cable to the back of the receiver, the another end (RCA cord) to your television's A/V inputs, the yellow plug to the VIDEO IN jack and the white plug to the AUDIO IN jack. 2. Plug the receiver power adapter into the 9V DC power jack on the back of the receiver and plug the power adapter into any 120 V/240 V power outlet. 3. Place the receiver either on top or near to your TV.